<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Yes. I've tried:<br>
<br>
- ztcfg<br>
- rmmod the wct4xxp module and zaptel and modprob'ing again<br>
- rebooting the server.<br>
<br>
No matter what I do, the second card is always "internally clocked".
The E1 I have plugged into that board is good. It can clock the first
card just fine.<br>
<br>
This is my complete zaptel.conf, just for reference:<br>
<br>
# E1 ISDN PRI.<br>
<br>
span=1,1,0,ccs,hdb3<br>
bchan=1-15<br>
dchan=16<br>
bchan=17-31<br>
<br>
# E1 R2 <br>
<br>
span=2,2,0,cas,hdb3<br>
cas=32-46:1101<br>
cas=48-62:1101<br>
<br>
# E1 ISDN PRI<br>
<br>
span=3,0,0,ccs,hdb3<br>
bchan=63-77<br>
dchan=78<br>
bchan=79-93<br>
<br>
# T1 Channel bank.<br>
<br>
span=4,0,0,esf,b8zs<br>
fxsks=94-101<br>
fxoks=102-117<br>
<br>
# E1 ISDN PRI. Same carrier as span 1. Line can be exchanged with span
1 and all is OK.<br>
<br>
span=5,1,0,ccs,hdb3<br>
bchan=118-132<br>
dchan=133<br>
bchan=134-148<br>
<br>
# E1 Unused.<br>
<br>
span=6,0,0,ccs,hdb3<br>
unused=149-163<br>
unused=164<br>
unused=165-179<br>
<br>
# E1 Unused<br>
<br>
span=7,0,0,ccs,hdb3<br>
unused=180-194<br>
unused=195<br>
unused=196-210<br>
<br>
# T1 Channel bank.<br>
<br>
span=8,0,0,esf,b8zs<br>
fxoks=211-234<br>
<br>
Fernando<br>
<br>
Rich Adamson wrote:
<blockquote cite="midChameleon.1101743926.adar0@vegas" type="cite">
<blockquote type="cite">
<pre wrap="">Your description makes perfect sense. My system is still getting HDLC overruns, which are
</pre>
</blockquote>
<pre wrap=""><!---->certainly a consequence of frame
</pre>
<blockquote type="cite">
<pre wrap="">slips because the second card is not getting clocked from the external source.
I come back to my basic question:
How do you configure an asterisk system so that a second TE410P card recognizes an external
</pre>
</blockquote>
<pre wrap=""><!---->clock source? No matter
</pre>
<blockquote type="cite">
<pre wrap="">what I've done the second card is always reported as "internally clocked". Configuring span 5
</pre>
</blockquote>
<pre wrap=""><!---->(the first on the second board)
</pre>
<blockquote type="cite">
<pre wrap="">with exactly the same timing parameters as for span 1 (which works great) is not doing it.
</pre>
</blockquote>
<pre wrap=""><!---->What is the trick?
</pre>
<blockquote type="cite">
<pre wrap="">Can anybody share the config files for a succesful installation with more than one TE410P
</pre>
</blockquote>
<pre wrap=""><!---->boards?
</pre>
<pre wrap=""><!---->
I don't recall from your previous postings on this topic, so I'll ask.
After config'ing span 5 in /etc/zaptel.conf, are you reloading/restarting
the drivers? (That _is_ necessary.)
Rich
_______________________________________________
Asterisk-Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Asterisk-Users@lists.digium.com">Asterisk-Users@lists.digium.com</a>
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
To UNSUBSCRIBE or update options visit:
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
</pre>
</blockquote>
</body>
</html>