<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2523" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I've currently configured incoming calls to
simultaneously ring an analog phone (via TDM400P) and two SIP
phones. I'd like to have it also simultaneously dial out the TDM400P
on a PSTN to ring my cell phone, and have the first one to answer win the
battle.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>In my digging I've figured out that I can add the
Zap channel to the dial list, such as
Dial(SIP/7001&SIP/7002&ZAP/3/5551212,20), however when I include the
PSTN line in this command (ZAP/3/....) I get an interesting thing
happening.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>All SIP phones start ringing.</FONT></DIV>
<DIV><FONT face=Arial size=2>Asterisk connects ZAP/3 to dial out and dials
out</FONT></DIV>
<DIV><FONT face=Arial size=2>Asterisk then says to the effect of "ZAP/3 has
answered the call" (since the line has now gone off hook) and stops ringing all
the SIP phones immediately, leaving me with only the cell phone ringing.
It then fails to go to Voicemail and just keeps ringing the cell phone, because
as far as Asterisk is concerned the line has been bridged and is
connected.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any suggestions?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>regards,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Paul</FONT></DIV>
<DIV> </DIV></BODY></HTML>