<HTML><HEAD></HEAD>
<BODY>
<DIV dir=ltr>Hi Folks,</DIV>
<DIV dir=ltr>I have a Rev H TDM01B board which seems to be working pretty well. However sometimes when I dial out on the Zap channel I get the Congestion signal on my SIP phone and a message logged in the log file saying :-</DIV>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<DIV dir=ltr>Unable to create channel of type 'Zap'</DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr>followed by :-</DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr>Dial argument takes format (technology1/[device:]numbe&technology2/[device:]number2...|optional timeout)</DIV>
<DIV dir=ltr> </DIV></BLOCKQUOTE>
<DIV dir=ltr>If I then dial in my SIP phone rings and I am again able to dial out.</DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr>I am guessing the Polarity reversal on the dial in is reseting the channel but why is it getting in this state in the first place, any idea's?</DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr>Regards</DIV>
<DIV dir=ltr>Ian</DIV>
<DIV dir=ltr> </DIV></BODY></HTML>