<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2600.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>Date: Mon, 20 Sep 2004 21:35:31 +0800<BR>From: Steve Underwood <<A
href="mailto:steveu@coppice.org">steveu@coppice.org</A>><BR>Subject: Re:
[Asterisk-Users] Re: Fw: Asterisk R2 Signaling<BR>To: Asterisk Users Mailing
List - Non-Commercial Discussion<BR><<A
href="mailto:asterisk-users@lists.digium.com">asterisk-users@lists.digium.com</A>><BR>Message-ID:
<<A
href="mailto:414EDCA3.4050502@coppice.org">414EDCA3.4050502@coppice.org</A>><BR>Content-Type:
text/plain; charset=ISO-8859-1; format=flowed<BR><BR>Sam Njenga
wrote:<BR><BR>> I have a digium D300-E1 card and the R2 link ready. Actually
it is <BR>> already connected to the card and all alarms cleared. Am not in
<BR>> Argentina but the R2 signaling is configured with Argentina signaling.
<BR>> It works very well when I connect a Cisco 5350 and configure it to
<BR>> Argentina R2 . Am not a developer so if you have a ready I'd be glad
<BR>> to have it .<BR>> <BR>> Regards<BR>> Sam
Njenga<BR><BR>There is no support in * for the
D300-E1.<BR><BR>Regards,<BR>Steve<BR></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Actually the card is </FONT></DIV>
<DIV><FONT face=Arial size=2>Digium Wildcard E100P E1/PRA Card </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>