<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=ks_c_5601-1987">
<META content="MSHTML 6.00.2800.1141" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>I'm installing TE405P card.</FONT></DIV>
<DIV><FONT size=2>This is my zaptel.conf.</FONT></DIV>
<DIV><FONT size=2>--------------------------------------</FONT></DIV>
<DIV><FONT
size=2>span=1,0,0,ccs,hdb3,crc4<BR>span=2,1,0,ccs,hdb3,crc4<BR>span=3,0,0,ccs,hdb3,crc4<BR>span=4,0,0,ccs,hdb3,crc4</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>loadzone = us<BR>defaultzone=
us<BR>--------------------------------------</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>When i modprobe wct4xxp, </FONT></DIV>
<DIV><FONT size=2>--------------------------------------</FONT></DIV>
<DIV><FONT size=2>PCI: Found IRQ 11 for device 02:0b.0<BR>PCI: Sharing IRQ 11
with 00:1d.7<BR>Found TE410P at base address ed800000, remapped to
e0951000<BR>TE410P version c01a009b<BR>FALC version: 00000005, Board ID:
00<BR>Reg 0: 0x1ad4b800<BR>Reg 1: 0x1ad4b000<BR>Reg 2: 0x07fc07fc<BR>Reg 3:
0x00000000<BR>Reg 4: 0x00000000<BR>Reg 5: 0x00000000<BR>Reg 6: 0xc01a009b<BR>Reg
7: 0x00001000<BR>Reg 8: 0x00000000<BR>Reg 9: 0x00ff0000<BR>Reg 10:
0x00000000<BR>TE410P: Launching card: 0<BR>TE410P: Setting up global serial
parameters<BR>Found a Wildcard: Wildcard TE410P-Xilinx<BR>Registered tone zone 0
(United States / North America)<BR>TE410P: Span 1 configured for
ESF/B8ZS<BR>TE410P: Span 2 configured for ESF/B8ZS<BR>SPAN 2: Primary Sync
Source<BR>TE410P: Span 3 configured for ESF/B8ZS<BR>TE410P: Span 4 configured
for ESF/B8ZS<BR>wct4xxp: Setting yellow alarm on span 1<BR>wct4xxp: Setting
yellow alarm on span 2<BR>wct4xxp: Setting yellow alarm on span 3<BR>wct4xxp:
Setting yellow alarm on span 4</FONT></DIV>
<DIV>
<DIV><FONT size=2>--------------------------------------</FONT></DIV>
<DIV><FONT size=2>I have two questions.</FONT></DIV>
<DIV><FONT size=2> - Is TE410P is same as TE405P, or did I received
different card?</FONT></DIV>
<DIV><FONT size=2> - zaptel.conf is configured CCS/HDB3. But It's
configured as ESF/B8ZS.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Hong</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV></DIV></BODY></HTML>