<html>
<body>
Hi,<br>
I tried to install the following hack. <br>
<a href="http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO" eudora="autourl">http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO</a><br>
But the 2nd AVM Fritz PCI card is still not showing up.<br><br>
My environment is:<br>
debian 2.4.24<br>
(asterisk 0.72) <br><br>
Just a quick explanation what I did:<br>
- edited the filed as described above<br>
- make clean<br>
- make <br>
- make install<br>
- reboot my machine<br>
- modprobe capi<br>
- insmod -f fcpci<br><br>
What do I miss? What did I do wrong?<br><br>
regards jakob<br><br>
********************************************************************<br>
asterisk:~# lsmod<br>
Module
Size Used by Tainted: PF<br>
fcpci
532320 2<br>
capi
6528 4<br>
kernelcapi
30624 3 [fcpci capi]<br>
capiutil
22912 0 [kernelcapi]<br>
asterisk:~#<br><br>
<br>
asterisk:/var/log# capiinit start<br>
modprobe: Can't locate module capifs<br>
modprobe: Can't locate module capifs<br>
WARNING: filesystem capifs not available<br>
modprobe: Can't locate module f2pci<br>
ERROR: failed to load driver f2pci<br>
asterisk:/var/log#<br><br>
This is what I see in the log file:<br><br>
Mar 22 17:37:55 asterisk -- MARK --<br>
Mar 22 17:42:14 asterisk kernel: CAPI-driver Rev 1.1.4.1: loaded<br>
Mar 22 17:42:14 asterisk kernel: capi20: started up with major 68<br>
Mar 22 17:42:14 asterisk kernel: kcapi: capi20 attached<br>
Mar 22 17:42:14 asterisk kernel: capi20: Rev 1.1.4.2: started up with
major 68 (no middleware)<br>
Mar 22 17:42:41 asterisk kernel: fcpci: AVM FRITZ!Card PCI (2nd) driver,
revision 0.5.2<br>
Mar 22 17:42:41 asterisk kernel: fcpci: (fcpci built on Mar 22 2004 at
17:41:36)<br>
Mar 22 17:42:41 asterisk kernel: fcpci: Loading...<br>
Mar 22 17:42:41 asterisk kernel: f2pci: Driver 'fcpci' attached to
stack<br>
Mar 22 17:42:41 asterisk kernel: kcapi: driver fcpci attached<br>
Mar 22 17:42:41 asterisk kernel: fcpci: Auto-attaching...<br>
Mar 22 17:42:41 asterisk kernel: PCI: Enabling device 00:0f.0 (0000 ->
0003)<br>
Mar 22 17:42:41 asterisk kernel: PCI: Assigned IRQ 5 for device
00:0f.0<br>
Mar 22 17:42:41 asterisk kernel: fcpci: Stack version 3.11-02<br>
Mar 22 17:42:41 asterisk kernel: kcapi: Controller 1: fritz2-pci
attached<br>
Mar 22 17:42:41 asterisk kernel: kcapi: card 1 "fritz2-pci"
ready.<br>
Mar 22 17:42:41 asterisk kernel: fcpci: Loaded.<br>
Mar 22 17:42:41 asterisk kernel: kcapi: notify up contr 1<br>
Mar 22 17:42:41 asterisk kernel: capi: controller 1 up<br>
Mar 22 17:57:55 asterisk -- MARK --<br>
asterisk:/var/log#<br><br>
<br><br>
<br><br>
</body>
</html>