<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2713.1100" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I have the following problem with Zap channels (two
X100Ps):</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>When I place a call between two asterisk via IAX
and on each end I have them connected to a PBX via an X100P, the call doesn´t
hang up.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>However, if one of the ends uses SIP rather than
Zap it works fine. It works fine also if I just use a Zap channel to call an
application (ie Voicemail) when the user hangs up, the Zap channels does hung
up. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have tried changing the indications.conf but no
luck. On my zapata.conf I have callprogress=no and busydetect=no.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>What else can I try? Are there any workarounds like
try to measure the bandwith or the packets to determine if someone is really
talking or the call is hung?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks in advance</FONT></DIV>
<DIV><FONT face=Arial size=2>Dan</FONT></DIV></BODY></HTML>