<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2653.12">
<TITLE>RE: [Asterisk-Users] Lucent and ISDN-PRI</TITLE>
</HEAD>
<BODY>
<P> <FONT SIZE=2>That document certainly is informative, thanks. I actually went with a tn464F that I happen to have and from the lucent side I have no problem setting it up as a signaling trunk group. Asterisk starts up, registers 1 D-Channel, and 23 B-Channels, but thats as far as I get.</FONT></P>
<P> <FONT SIZE=2> When I try to dial the asterisk via the Feature access code I defined on the definity I don't get any sign of a connection. The definity dials, and then waits until timeout at which point I get a busyback. Similarly, if I try to dial out from the Asterisk I get an all busy. I turned on pri intense debug span 1, to see if there were any obvious errors. When I do a dial I get the following traceback:</FONT></P>
<P><FONT SIZE=2>---- start incredibly long debug message ------</FONT>
</P>
<P><FONT SIZE=2>> [</FONT>
<BR><FONT SIZE=2>> [02</FONT>
<BR><FONT SIZE=2>> [02 01</FONT>
<BR><FONT SIZE=2>> [02 01 01</FONT>
<BR><FONT SIZE=2>> [02 01 01 38</FONT>
<BR><FONT SIZE=2>> [02 01 01 38 ]</FONT>
<BR><FONT SIZE=2>> [02 01 01 38 ]</FONT>
<BR><FONT SIZE=2>> Supervisory frame:</FONT>
<BR><FONT SIZE=2>> SAPI: 00 C/R: 1 EA: 0</FONT>
<BR><FONT SIZE=2>> TEI: 000 EA: 1</FONT>
<BR><FONT SIZE=2>> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]</FONT>
<BR><FONT SIZE=2>> N(R): 028 P/F: 0</FONT>
<BR><FONT SIZE=2>> 0 bytes of data</FONT>
<BR><FONT SIZE=2>-- Restarting T203 counter</FONT>
<BR><FONT SIZE=2>-- Restarting T203 counter</FONT>
</P>
<P><FONT SIZE=2>< [</FONT>
<BR><FONT SIZE=2>< [02</FONT>
<BR><FONT SIZE=2>< [02 01</FONT>
<BR><FONT SIZE=2>< [02 01 38</FONT>
<BR><FONT SIZE=2>< [02 01 38 be</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08 02</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08 02 80</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08 02 80 f8</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08 02 80 f8 5a</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08 02 80 f8 5a 08</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08 02 80 f8 5a 08 02</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08 02 80 f8 5a 08 02 81</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08 02 80 f8 5a 08 02 81 d1</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08 02 80 f8 5a 08 02 81 d1 ]</FONT>
<BR><FONT SIZE=2>< [02 01 38 be 08 02 80 f8 5a 08 02 81 d1 ]</FONT>
<BR><FONT SIZE=2>< Informational frame:</FONT>
<BR><FONT SIZE=2>< SAPI: 00 C/R: 1 EA: 0</FONT>
<BR><FONT SIZE=2>< TEI: 000 EA: 1</FONT>
<BR><FONT SIZE=2>< N(S): 028 0: 0</FONT>
<BR><FONT SIZE=2>< N(R): 095 P: 0</FONT>
<BR><FONT SIZE=2>< 9 bytes of data</FONT>
<BR><FONT SIZE=2>-- ACKing all packets from 94 to (but not including) 95</FONT>
<BR><FONT SIZE=2>-- Since there was nothing left, stopping T200 counter</FONT>
<BR><FONT SIZE=2>-- Stopping T203 counter since we got an ACK</FONT>
<BR><FONT SIZE=2>-- Nothing left, starting T203 counter</FONT>
<BR><FONT SIZE=2>< Protocol Discriminator: Q.931 (8) len=9</FONT>
<BR><FONT SIZE=2>< Call Ref: len= 2 (reference 33016/0x80F8) (Terminator)</FONT>
<BR><FONT SIZE=2>< Message type: RELEASE COMPLETE (90)</FONT>
<BR><FONT SIZE=2>< Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)</FONT>
<BR><FONT SIZE=2>< Ext: 1 Cause: Invalid call reference value (81), class = Invalid message (5) ]</FONT>
<BR><FONT SIZE=2>Sending Receiver Ready (29)</FONT>
</P>
<P><FONT SIZE=2>> [</FONT>
<BR><FONT SIZE=2>> [02</FONT>
<BR><FONT SIZE=2>> [02 01</FONT>
<BR><FONT SIZE=2>> [02 01 01</FONT>
<BR><FONT SIZE=2>> [02 01 01 3a</FONT>
<BR><FONT SIZE=2>> [02 01 01 3a ]</FONT>
<BR><FONT SIZE=2>> [02 01 01 3a ]</FONT>
<BR><FONT SIZE=2>> Supervisory frame:</FONT>
<BR><FONT SIZE=2>> SAPI: 00 C/R: 1 EA: 0</FONT>
<BR><FONT SIZE=2>> TEI: 000 EA: 1</FONT>
<BR><FONT SIZE=2>> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]</FONT>
<BR><FONT SIZE=2>> N(R): 029 P/F: 0</FONT>
<BR><FONT SIZE=2>> 0 bytes of data</FONT>
<BR><FONT SIZE=2>-- Restarting T203 counter</FONT>
<BR><FONT SIZE=2>-- Restarting T203 counter</FONT>
</P>
<P><FONT SIZE=2>< [</FONT>
<BR><FONT SIZE=2>< [02</FONT>
<BR><FONT SIZE=2>< [02 01</FONT>
<BR><FONT SIZE=2>< [02 01 3a</FONT>
<BR><FONT SIZE=2>< [02 01 3a be</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08 02</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08 02 80</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08 02 80 f8</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08 02 80 f8 5a</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08 02 80 f8 5a 08</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08 02 80 f8 5a 08 02</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08 02 80 f8 5a 08 02 81</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08 02 80 f8 5a 08 02 81 d1</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08 02 80 f8 5a 08 02 81 d1 ]</FONT>
<BR><FONT SIZE=2>< [02 01 3a be 08 02 80 f8 5a 08 02 81 d1 ]</FONT>
<BR><FONT SIZE=2>< Informational frame:</FONT>
<BR><FONT SIZE=2>< SAPI: 00 C/R: 1 EA: 0</FONT>
<BR><FONT SIZE=2>< TEI: 000 EA: 1</FONT>
<BR><FONT SIZE=2>< N(S): 029 0: 0</FONT>
<BR><FONT SIZE=2>< N(R): 095 P: 0</FONT>
<BR><FONT SIZE=2>< 9 bytes of data</FONT>
<BR><FONT SIZE=2>-- ACKing all packets from 94 to (but not including) 95</FONT>
<BR><FONT SIZE=2>-- Since there was nothing left, stopping T200 counter</FONT>
<BR><FONT SIZE=2>-- Stopping T203 counter since we got an ACK</FONT>
<BR><FONT SIZE=2>-- Nothing left, starting T203 counter</FONT>
<BR><FONT SIZE=2>< Protocol Discriminator: Q.931 (8) len=9</FONT>
<BR><FONT SIZE=2>< Call Ref: len= 2 (reference 33016/0x80F8) (Terminator)</FONT>
<BR><FONT SIZE=2>< Message type: RELEASE COMPLETE (90)</FONT>
<BR><FONT SIZE=2>< Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)</FONT>
<BR><FONT SIZE=2>< Ext: 1 Cause: Invalid call reference value (81), class = Invalid message (5) ]</FONT>
<BR><FONT SIZE=2>Sending Receiver Ready (30)</FONT>
</P>
<BR>
<P><FONT SIZE=2>---- End incredibly long debug message ------</FONT>
</P>
<P><FONT SIZE=2>Any suggestions? I feel like I am close.. but no cigar. :) Invalid message (5) anyone? I haven't looked at the libpri code but perhaps there is further explanation in there.</FONT></P>
<P><FONT SIZE=2>I'm using pri_cpe channels 1-23, dchan=24, bchan=1-23.</FONT>
</P>
<P><FONT SIZE=2>Any help is appreciated... thanks again,</FONT>
</P>
<BR>
<P><FONT SIZE=2>Matt</FONT>
</P>
<P><FONT SIZE=2>-----Original Message-----</FONT>
<BR><FONT SIZE=2>From: Ken Godee [<A HREF="mailto:ken@perfect-image.com">mailto:ken@perfect-image.com</A>]</FONT>
<BR><FONT SIZE=2>Sent: Monday, January 19, 2004 5:53 PM</FONT>
<BR><FONT SIZE=2>To: asterisk-users@lists.digium.com</FONT>
<BR><FONT SIZE=2>Subject: Re: [Asterisk-Users] Lucent and ISDN-PRI</FONT>
</P>
<BR>
<P><FONT SIZE=2>Matthew Branton wrote:</FONT>
</P>
<P><FONT SIZE=2>> Hi Everyone,</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> So I have been further exploring the integration of our asterisk server </FONT>
<BR><FONT SIZE=2>> and our lucent definity g3si system. I took the suggestion of setting up </FONT>
<BR><FONT SIZE=2>> an isdn-pri line added the two way tie trunk and the signalling group, </FONT>
<BR><FONT SIZE=2>> but can't seem to get the PRI signalling working on the asterisk </FONT>
<BR><FONT SIZE=2>> correctly. I've set pri type to network on the lucent, and pri_cpe in </FONT>
<BR><FONT SIZE=2>> zapata on the asterisk, but I am a bit confused as to the zaptel </FONT>
<BR><FONT SIZE=2>> settings in this situation. It seems no matter what signaling mode I </FONT>
<BR><FONT SIZE=2>> choose in zaptel.conf (with the exception of clear) I get an error on </FONT>
<BR><FONT SIZE=2>> asterisk startup complaining about requested PRI vs unknown signalling.</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> Any help would be appreciated in getting this working / ironing out some </FONT>
<BR><FONT SIZE=2>> of my conceptual issues. :) I did get the lucent ot work under an e&m </FONT>
<BR><FONT SIZE=2>> based tie group but that didn't seem to give me any more functionality </FONT>
<BR><FONT SIZE=2>> than I had managed before.</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> Thanks,</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> Matt</FONT>
<BR><FONT SIZE=2>> </FONT>
</P>
<P><FONT SIZE=2>Matt,</FONT>
</P>
<P><FONT SIZE=2>You know I'll be following this thread!</FONT>
</P>
<P><FONT SIZE=2>Found a good reference for G3 isdn-pri you should</FONT>
<BR><FONT SIZE=2>have a look. Go's into good detail, more then the</FONT>
<BR><FONT SIZE=2>stock implementation manuals do.</FONT>
</P>
<P><FONT SIZE=2><A HREF="http://support.avaya.com/elmodocs2/multivantage/025107_1/025107_1.pdf" TARGET="_blank">http://support.avaya.com/elmodocs2/multivantage/025107_1/025107_1.pdf</A></FONT>
</P>
<P><FONT SIZE=2>I noticed you said you where going to use a TN767(E) circuit pack, did you?</FONT>
</P>
<P><FONT SIZE=2>Depending on your system(version) you might have to use TN464 for ISDN-PRI</FONT>
</P>
<P><FONT SIZE=2>It's questionable as to weither you can use a TN767 for ISDN-PRI w/FAS</FONT>
<BR><FONT SIZE=2>Some systems you can, others you can not.</FONT>
<BR><FONT SIZE=2>You might need to install a packet adjunct TN555</FONT>
</P>
<P><FONT SIZE=2>Are you sure your D channel is up?</FONT>
<BR><FONT SIZE=2>It's seems the TN767 is mostly used as ISDN-PRI w/NFAS.</FONT>
</P>
<P><FONT SIZE=2>Anyhow just a thought, cause that's where I'm at right now</FONT>
<BR><FONT SIZE=2>is trying to figure out which circuit pack I need to use.</FONT>
</P>
<BR>
<BR>
<BR>
<BR>
<P><FONT SIZE=2>_______________________________________________</FONT>
<BR><FONT SIZE=2>Asterisk-Users mailing list</FONT>
<BR><FONT SIZE=2>Asterisk-Users@lists.digium.com</FONT>
<BR><FONT SIZE=2><A HREF="http://lists.digium.com/mailman/listinfo/asterisk-users" TARGET="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</A></FONT>
<BR><FONT SIZE=2>To UNSUBSCRIBE or update options visit:</FONT>
<BR><FONT SIZE=2> <A HREF="http://lists.digium.com/mailman/listinfo/asterisk-users" TARGET="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</A></FONT>
</P>
</BODY>
</HTML>