<DIV>Hi,</DIV>
<DIV> </DIV>
<DIV>I have received a new card TDM400P revision E, from digium. When I tried to modprobe wcfxs it gave me the following errors:</DIV>
<DIV> </DIV>
<DIV>Freshmaker version: 63<BR>Freshmaker passed register test<BR>ProSLIC on module 0 insane (1) 255 should be 2<BR>Module 0: Not installed<BR>ProSLIC on module 1 insane (1) 255 should be 2<BR>Module 1: Not installed<BR>ProSLIC on module 2 insane (1) 255 should be 2<BR>Module 2: Not installed<BR>ProSLIC on module 3 insane (1) 0 should be 2<BR>Module 3: Not installed<BR>/lib/modules/2.4.20-8/misc/wcfxs.o: init_module: No such device<BR>Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.<BR> You may find more information in syslog or the output from dmesg<BR>/lib/modules/2.4.20-8/misc/wcfxs.o: insmod /lib/modules/2.4.20-8/misc/wcfxs.o failed<BR>/lib/modules/2.4.20-8/misc/wcfxs.o: insmod wcfxs failed<BR></DIV>
<DIV> </DIV>
<DIV>I have another TDM400P revision C (few months older) which works perfectly on the same slot of the system. The machine is AMD750 and I have tested several other cards and they worked fine.</DIV>
<DIV> </DIV>
<DIV>Plz suggest me about this problem and how to correct it.</DIV>
<DIV> </DIV>
<DIV>Regards</DIV>
<DIV>Azher</DIV><p><hr SIZE=1>
Do you Yahoo!?<br>
<a href="http://us.rd.yahoo.com/evt=10469/*http://sitebuilder.yahoo.com">Yahoo! SiteBuilder</a> - Free, easy-to-use web site design software