[asterisk-users] ConfBridge user joining not getting video

[Joshua C. Colp]

On Thu, Jan 13, 2022 at 10:01 AM Jerry Geis <jerry.geis at gmail.com> wrote:

>
>
> On Wed, Jan 12, 2022 at 5:09 PM Jerry Geis <jerry.geis at gmail.com> wrote:
>
>> I am running 18.8.0 -  videosupport is enabled. I get video calls no
>> problem.
>>
>> However when I make a call file to a soft phone and include:
>> Codecs: ulaw,h264
>> in the call file...
>>
>> sip show channels - shows:
>> 4013c15f1f4cdff  (ulaw|h264)      No       Tx: ACK
>> so clearly the caller has h264.
>>
>> Then when I "automatically" request another softphone to join my conf
>> bridge...
>> the soft phone rings, and answers - all I get is audio and sip show
>> channels for that device:
>> 5c77cf1455e4afc  (ulaw)           No       Tx: ACK
>>
>> How do I get Video in the confbridge ?
>>
>> Thanks
>>
>> Jerry
>>
>
>
>
> hi Josh,
>
> here is the sip debug... It shows the the first call negotiate video - but
> the second call to bring the end video device into the conf - no video
> negotitation.
>
> Audio is at 15542
> Adding codec ulaw to SDP
> Adding codec alaw to SDP
> Adding codec gsm to SDP
>

chan_sip did not add a video stream. What is the actual configuration for
it? What is the actual call file used for it?

-- 
Joshua C. Colp
Asterisk Technical Lead
Sangoma Technologies
Check us out at www.sangoma.com and www.asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20220113/20dfa771/attachment.html>