[asterisk-users] Failed to authenticate

[Jerry Geis]

On Mon, Aug 9, 2021 at 8:32 AM Jerry Geis <jerry.geis at gmail.com> wrote:

>
>
> On Mon, Aug 9, 2021 at 8:11 AM Jerry Geis <jerry.geis at gmail.com> wrote:
>
>>
>>
>> On Mon, Aug 9, 2021 at 7:57 AM Jerry Geis <jerry.geis at gmail.com> wrote:
>>
>>>
>>>
>>> On Sun, Aug 8, 2021 at 3:18 PM Jerry Geis <jerry.geis at gmail.com> wrote:
>>>
>>>> I am not using a SIP trunk as I normally do.
>>>>
>>>> I have an extensions 3382 setup that my server registers to the other
>>>> SIP system.
>>>> When the other system calls 3381 on my system I am getting this error:
>>>>
>>>> [Jul 27 10:08:50] WARNING[89791][C-00000068] chan_sip.c: username
>>>> mismatch, have <3381>, digest has <8124>
>>>> [Jul 27 10:08:50] NOTICE[89791][C-00000068] chan_sip.c: Failed to
>>>> authenticate device "USCOL TEST" <sip:XXXX at IP>;tag=1c1947164290 for
>>>> INVITE, code = -2
>>>>
>>>> How I allow this ?   I want to allow any SIP call to 3381.
>>>> Using Astering 18.4.0
>>>>
>>>> Thanks,
>>>>
>>>> Jerry
>>>>
>>>
>>> Sure here it is:
>>> [general](+)
>>> register => 3382:XX at IP/3382
>>>
>>> ; Description: Connection to PBX
>>> [3382]
>>> type=friend
>>> defaultname=3382
>>> defaultuser=3382
>>> secret=XX
>>> dtmfmode=RFC2833
>>> host=IP
>>> description=Connection to PBX
>>> context=incoming
>>> rtptimeout=60
>>> rtpholdtimeout=60
>>> rtpkeepalive=60
>>> callerid=3382
>>> qualify=no
>>> canreinvite=no
>>> nat=never
>>> disallow=all
>>> allow=ulaw
>>> allow=alaw
>>> allow=gsm
>>>
>>> Thanks
>>> Jerry
>>>
>>>
>> > What's the association between 3381 and 3382?
>>
>> 3381 is the number they want to dial into my asterisk.   3382 is the
>> registered extension to their system.
>>
>> Jerry
>>
>>
>>
>>>
>>>
>>
> >You register as 3382. That means that if someone on their system dials
> 3382,
> >your Asterisk server gets the call.
>
>
> I think at first I was only using 3381. That was the extension I
> registered. There was no 3382.  Something was going wrong there also.
> (Might have been a similar error),
> and I could not get that to work either.
>
> Jerry
>


Well my issue has changed now.  I have dropped the 3382. Changed back to
3381.   So I am registering 3381 to the other server.
The other server is 10.35.229.5.  My IP is 10.35.229.11.
I have two network cards.

10.35.229.11 is Eth0
192.168.1.60 is Eth1

route looks OK
route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth1
10.35.229.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     1003   0        0 eth1
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth1

The issue is that the call comes in but the user hears no audio.
There is any crazy networking going on - why would the user not hear audio ?
Thanks

Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20210809/26f0bba6/attachment.html>