[asterisk-users] Freepbx / Asterisk PJsip multipe devices

[Mitch Claborn]

You can do this in the dial plan. Register the devices separately and 
include both addresses in the Dial() command.


Mitch

On 2/6/19 8:16 AM, basti wrote:
> In other words.
> 
> I there a way that both phones are ring with only one extension?
> 
> On 06.02.19 15:05, basti wrote:
>> both phones are in the same net.
>> when the soft phone is shut down, on hardware phone only an led is
>> flashing to show an incoming call but no sound.
>>
>> both phones use the same extension. that is the reason why I use pjsip.
>>
>> On 06.02.19 14:59, Antony Stone wrote:
>>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote:
>>>
>>>> These two phones are not using the same extension, are they?
>>>
>>> If you shut down the softphone, does the hardware phone then ring?
>>>
>>>
>>> Antony.
>>>
>>>> On 2/6/2019 8:49 AM, basti wrote:
>>>>> both phones are registered. and the hardware phone can also make calls.
>>>>> but an incoming call is not displayed and also not hearing.
>>>>>
>>>>> Call Waiting is also disabled.
>>>>>
>>>>> On 06.02.19 14:07, Cyril Alberts wrote:
>>>>>> Hi,
>>>>>> look at your registrations, is the hardware phone registered?
>>>>>> if yes, which phone vendor do you want to connect? can you make
>>>>>> outgoing calls with hardwarephone?
>>>>>>
>>>>>> BR Cyril
>>>>>>
>>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti:
>>>>>>> Hello,
>>>>>>>
>>>>>>> I have some user that had have a hardwarephone and an softphone. I
>>>>>>> use pjsip driver and set "Max Contacts = 2" to have register both at the
>>>>>>> same time.
>>>>>>>
>>>>>>> But Only the softphone is ring. the hardware phone is mute.
>>>>>>>
>>>>>>> How can i fix this?
>>>
>>
>