[asterisk-users] Freepbx / Asterisk PJsip multipe devices

[basti]

In other words.

I there a way that both phones are ring with only one extension?

On 06.02.19 15:05, basti wrote:
> both phones are in the same net.
> when the soft phone is shut down, on hardware phone only an led is
> flashing to show an incoming call but no sound.
> 
> both phones use the same extension. that is the reason why I use pjsip.
> 
> On 06.02.19 14:59, Antony Stone wrote:
>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote:
>>
>>> These two phones are not using the same extension, are they?
>>
>> If you shut down the softphone, does the hardware phone then ring?
>>
>>
>> Antony.
>>
>>> On 2/6/2019 8:49 AM, basti wrote:
>>>> both phones are registered. and the hardware phone can also make calls.
>>>> but an incoming call is not displayed and also not hearing.
>>>>
>>>> Call Waiting is also disabled.
>>>>
>>>> On 06.02.19 14:07, Cyril Alberts wrote:
>>>>> Hi,
>>>>> look at your registrations, is the hardware phone registered?
>>>>> if yes, which phone vendor do you want to connect? can you make
>>>>> outgoing calls with hardwarephone?
>>>>>
>>>>> BR Cyril
>>>>>
>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti:
>>>>>> Hello,
>>>>>>
>>>>>> I have some user that had have a hardwarephone and an softphone. I
>>>>>> use pjsip driver and set "Max Contacts = 2" to have register both at the
>>>>>> same time.
>>>>>>
>>>>>> But Only the softphone is ring. the hardware phone is mute.
>>>>>>
>>>>>> How can i fix this?
>>
>