[asterisk-users] DTMF tones in MixMonitor recording

Patrick Wakano pwakano at gmail.com
Tue May 1 04:52:22 CDT 2018


Thanks very much for the reply Joshua!
So I guess that setting dtmfmode=auto would be the safest choice in order
to strip out the DTMFs from the recording, right?
Cheers!
Patrick Wakano

On Tue, 1 May 2018, 19:36 Joshua Colp, <jcolp at digium.com> wrote:

> On Mon, Apr 30, 2018, at 11:23 PM, Patrick Wakano wrote:
> > Hello list,
> > Hope you are all doing fine!
> >
> > I have stumbled over some piece of dialplan code in which apparently they
> > were trying to avoid recording the DTMF tones in the wav file. It is
> really
> > messy and I am not sure if this really works. So after a bit of research
> I
> > found this comment (
> > https://community.asterisk.org/t/asterisk-dtmf-record/65040) in which
> it is
> > said:
> >
> > *"Asterisk strips the DTMF from the audio stream when configured for
> > inband, so internal stuff can react to the DTMF and so the other side
> does
> > not hear the tone unless they are using inband (in which case it is
> > regenerated)"*
> > So my questions are, what are the cases in which Asterisk regenerates the
> > DTMFs? Does it cause the recording to have the tone as well, or is it
> only
> > transmitted to the other leg without being generated to the recording
> file?
> > Also, what if one or both legs are RFC2833? From my tests the RFC2833
> > events never show up in the recording, but I just want to confirm that
> this
> > is always true.
>
> If properly configured then Asterisk will always strip and regenerate the
> DTMF tone. You have to purposely misconfigure things to cause it to not get
> stripped. IE: DTMF is actually inband but you configure it for RFC2833.
> Since Asterisk wouldn't be listening to the audio stream, it would go right
> through and get recorded.
>
> --
> Joshua Colp
> Digium, Inc. | Senior Software Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - US
> Check us out at: www.digium.com & www.asterisk.org
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at:
> https://community.asterisk.org/
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20180501/5b3665f7/attachment.html>


More information about the asterisk-users mailing list