[asterisk-users] incoming call label

thelma at sys-concept.com thelma at sys-concept.com
Thu Feb 15 20:16:02 CST 2018


On 02/15/2018 04:49 PM, Joshua Colp wrote:
> On Thu, Feb 15, 2018, at 7:46 PM, thelma at sys-concept.com wrote:
> 
> <snip>
> 
>>
>> Thanks again for the hint.
>> Here is the output from asterisk.
>>
>> The call is coming on Audocodes gateway from: pstn-4444
>>
>> But asterisk display:
>> Found peer 'pstn-9998' for '7804715665' from 10.10.0.8:5060
>>
>> Why not loolking up "pstn-4444" in sip.conf?
> 
> It found pstn-4444 using 10.10.0.8:5060 - if the request always comes from the same IP address and port it has no other way built in to differentiate between the two except by matching based on username in the 'From' header.
> 

Call comes from same IP address always.
To comes  form Audiocode:

<--- SIP read from UDP:10.10.0.8:5060 --->
INVITE sip:4 at 10.10.0.4 SIP/2.0
Via: SIP/2.0/UDP 10.10.0.8;branch=z9hG4bKac766808844
Max-Forwards: 70
From: "Z" <sip:7804715665 at 10.10.0.8>;tag=1c766802762
To: <sip:4 at 10.10.0.4>
Call-ID: 7668022781522018162620 at 10.10.0.8
CSeq: 1 INVITE
Contact: <sip:pstn-4444 at 10.10.0.8:5060>

Contact: "sip:pstn-4444"

And it found in sip.conf only:
Found peer 'pstn-9998' for '7804715665' from 10.10.0.8:5060

Is perhaps the name effected by the special character "-" (dash) that is
why it only matches "pstn" and take the first one it found.  Will it
make a difference if I rename the port to pstn_4444 in configuration files.

--
Thelma



More information about the asterisk-users mailing list