[asterisk-users] Confbridge SFU for Asterisk 15
jcolp at digium.com
Tue Nov 14 17:06:23 CST 2017
On Tue, Nov 14, 2017, at 07:03 PM, Carlos Chavez wrote:
> On 11/14/17 4:27 PM, Joshua Colp wrote:
> > On Tue, Nov 14, 2017, at 06:25 PM, Carlos Chavez wrote:
> >> On 11/14/17 3:55 PM, Joshua Colp wrote:
> >>> On Tue, Nov 14, 2017, at 05:47 PM, Carlos Chavez wrote:
> >>>> I followed the blog post and I can get video from the conference if
> >>>> I configure the bridge as follow_talker so I know everything is working
> >>>> on the pjsip side. The only problem is that video_mode = sfu is
> >>>> apparently not valid in either confbridge.conf or via the dialplan and I
> >>>> get no video with that option.
> >>> The option, when set, will show up as "no video" if you do the
> >>> "confbridge show" as you mentioned. That's a bug which is why I
> >>> mentioned filing an issue. It is still valid though.
> >>> Have you confirmed that the maximum number of streams is set using
> >>> "pjsip show endpoint"? and that the codecs are correct?
> >> allow : (ulaw|vp8|h264)
> >> max_audio_streams : 10
> >> max_video_streams : 10
> >> Video and audio work fine if I use follow_talker in the
> >> confbridge. No video when set to sfu.
> > What browser are you trying from? Can you provide a SIP trace (pjsip set
> > logger on)? And what is the output of "core show channel" for each
> > channel when they are in the video conference bridge?
> We have tried with Firefox (56) and Chrome 61.0.3163.100 on both
> Windows and OSX.
> SIP trace:
> It appears that the CBAnn channels only have audio a no video.
Those are the announcer channels for playing audio into the conference
bridge. I need to see an attempt with more than 1 participant in the
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org
More information about the asterisk-users