[asterisk-users] Confbridge SFU for Asterisk 15

[Joshua Colp]

On Tue, Nov 14, 2017, at 06:25 PM, Carlos Chavez wrote:
> On 11/14/17 3:55 PM, Joshua Colp wrote:
> 
> > On Tue, Nov 14, 2017, at 05:47 PM, Carlos Chavez wrote:
> >>       I followed the blog post and I can get video from the conference if
> >> I configure the bridge as follow_talker so I know everything is working
> >> on the pjsip side.  The only problem is that video_mode = sfu is
> >> apparently not valid in either confbridge.conf or via the dialplan and I
> >> get no video with that option.
> > The option, when set, will show up as "no video" if you do the
> > "confbridge show" as you mentioned. That's a bug which is why I
> > mentioned filing an issue. It is still valid though.
> >
> > Have you confirmed that the maximum number of streams is set using
> > "pjsip show endpoint"? and that the codecs are correct?
> >
> allow                              : (ulaw|vp8|h264)
> max_audio_streams                  : 10
> max_video_streams                  : 10
> 
>      Video and audio work fine if I use follow_talker in the 
> confbridge.  No video when set to sfu.

What browser are you trying from? Can you provide a SIP trace (pjsip set
logger on)? And what is the output of "core show channel" for each
channel when they are in the video conference bridge?

-- 
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org