[asterisk-users] using dynamic DAHDI loop back

[Carlos Chavez]

On 2016-03-13 07:01, Mehdi Shirazi wrote:
> Hi
> This is my system.conf :
> dynamic=loc,1:0,31,0
> bchan=1-15,17-31
> dchan=16
> echocanceller=mg2,1-15,17-31
> 
> dynamic=loc,1:1,31,0
> bchan=32-46,48-62
> dchan=47
> echocanceller=mg2,32-46,48-62
> 
> and this is my chan_dahdi.conf:
> group=0
> echocancel = yes
> echocancelwhenbridged=no
> context=from-pstn
> switchtype = euroisdn
> signalling = pri_net
> channel => 1-15,17-31
> group=1
> switchtype = euroisdn
> signalling = pri_cpe
> channel => 32-46,48-62
> 
> all dahdi command line outputs like dahdi_tool are ok but inside
> Asterisk  there is
> nothing in "Dahdi show channels" .
> please help me
> 
> Regards

Is the Dahdi module compiled into Asterisk?  Does "module show like 
chan" show the chan_dahdi.so module?  Look into 
/usr/lib/asterisk/modules/ for the module.  If it is not there then you 
did not compile Asterisk with Dahdi support.  If you installed from 
packages maybe the dahdi module is a separate package.

If the module is present but not loaded then there is probably an error 
in your chan_dahdi.conf file that prevents it from loading.  Start 
Asterisk manually and look for an error while loading chan_dahdi.conf.

-- 
Telecomunicaciones Abiertas de México S.A. de C.V.
Carlos Chávez
dCAP #1349
+52 (55)9116-91161