[asterisk-users] Dial your phone and contact phone from within outlook?

[Ryan, Travis]

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Olivier
Sent: Thursday, March 03, 2016 10:50 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Dial your phone and contact phone from within outlook?

Is TAPI still available on Windows 10, for instance ?

2016-03-02 23:22 GMT+01:00 Neeraj Chand <nrjchnd at gmail.com<mailto:nrjchnd at gmail.com>>:
Hi Travis,

Have a look at this:

http://www.ipcom.at/en/telephony/siptapi/

I have used this in the past to do something similar, unless you have an Exchange Enterprise setup in which case I would suggest exploring unified messaging

Thanks,

Neeraj

On Thu, Mar 3, 2016 at 8:22 AM, Ryan, Travis <RyanT at oscarwinski.com<mailto:RyanT at oscarwinski.com>> wrote:
I am wondering what the best solution is for initiating a call from Outlook Contacts. I imagine something that would start the call from the outlook card (or similar) and then dial the user’s extension and the contact’s phone number and place them in a bridge.

Anyone use something like this?

Travis Ryan
Director of Information Technologies
Oscar Winski Company
2407 North Ninth Street
Lafayette, IN 47905
ryant at oscarwinski.com<mailto:ryant at oscarwinski.com>
(765) 742-1102<tel:742-1102>

FFYI, this worked great for me on Windows 7. Not sure if it works with any after as I’ve not tested.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160303/20760b92/attachment.html>