[asterisk-users] how to join 2 channels using AGI/AMI

[Steve Edwards]

Please don't top post.

On Thu, 30 Jun 2016, nik600 wrote:

> this is the point, and the strange thing:DTMF is set to rfc2833, but is 
> working both on incoming and outgoing calls, it is not working only on 
> calls generated with the Originate AMI command, or with the queue member 
> that point to Local dialplan, as you suggested

Does 'show channel' on a leg originated by a handset differ from a leg 
originated by AMI?

-- 
Thanks in advance,
-------------------------------------------------------------------------
Steve Edwards       sedwards at sedwards.com      Voice: +1-760-468-3867 PST
             https://www.linkedin.com/in/steve-edwards-4244281