[asterisk-users] Impossible to use any recent asterisk version with chan_sip
barryf-lists at flanagan.ie
Wed Jul 6 10:18:20 CDT 2016
On 6 July 2016 at 16:14, Joshua Colp <jcolp at digium.com> wrote:
> Leandro Dardini wrote:
>> I'd like to know if anyone of you is finding my same problems using any
>> recent asterisk version, after 13.7 / 13.8 with chan_sip.
>> If I use any recent asterisk version, after just few seconds asterisk
>> completely locks up, stopping processing SIP/UDP packets. Nothing is
>> written in the asterisk log, but if I run "netstat -nap | grep 5060" I
>> see the UDP buffer filled up.
>> If I step back to asterisk 13.2, then all is fine and asterisk is rock
>> I know I should use PJSIP and chan_sip is no more supported, but at this
>> point, if this is the working state of chan_sip, it should be completely
> It's not the normal working state of chan_sip, in fact it hasn't really
> been touched in any way that would cause this to happen and I haven't seen
> any bug reports along these lines. I also know that FreePBX is running both
> chan_sip and chan_pjsip and haven't experienced anything so it may be
> isolated to you. If you follow the instructions on the wiki it will
> provide a backtrace which will show where chan_sip is hanging.
This was actually reported in
https://issues.asterisk.org/jira/browse/ASTERISK-25468 with backtraces. It
appeared to have started in 13.5, as I tested all from 13.2 to 13.6 at the
Hope this helps.
> Joshua Colp
> Digium, Inc. | Senior Software Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - US
> Check us out at: www.digium.com & www.asterisk.org
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the asterisk-users