[asterisk-users] set framing on dynamic interface DAHDI

[Rafael dos Santos Saraiva]

Hi

I working with DAHDI Dynamic Interfaces using ethernet boards. I need set
the framing to CCS, but the documentation of DAHDI not refer to it. My
question is: there is a way to do this?

*system.conf*
dynamic=eth,enp0s8/00:00:00:00:00:01/0,31,0
echocanceller=mg2,1-15,17-31
bchan=1-15,17-31
dchan=16
alaw=1-15,17-31

*dahdi_scan*
[1]
active=yes
alarms=RED
description=Dynamic 'eth' span at 'enp0s8/00:00:00:
name=DYN/eth/enp0s8/00:0
manufacturer=
devicetype=DYN/eth/enp0s8/00:00:00:00:00:01/0
location=
basechan=1
totchans=31
irq=0
type=digital-DYNAM
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI,HDB3
framing_opts=ESF,D4,CCS,CRC4
coding=
framing=CAS


Thank's in advance.



[image: Sua Foto] <rafaelsnsa at gmail.com> Rafael S. Saraiva
Porto Alegre - RS | Mobile:  (51) 8174-7956
<http://br.linkedin.com/pub/rafael-saraiva/52/aab/230>
<https://plus.google.com/u/0/+RafaelSaraivaRS>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160122/3cb5898d/attachment.html>