[asterisk-users] ARI bridges

[Joshua Colp]

Sylvain Boily wrote:
> Hello,

Just a note - there's an asterisk-app-dev mailing list[1] which is 
better suited for these kind of posts.

> I did some tests because i'm interesting to transfer a non stasis bridge
> to a stasis bridge and i found a strange situation.

You can't, you have to move the channels into your Stasis application 
using AMI and create a new bridge like you state below. Only one entity 
(be it an existing application like app_dial, or an external application 
written using ARI) can have absolute control over a bridge or else both 
could get really confused as each manipulates things.

>
> A call B
> B answer
>
> You have a bridge
>
> On my asterisk CLI:
>
> xivo*CLI>  bridge show b1d8fb21-ec6d-469a-9dde-bb6bfd5618cc
> Id: b1d8fb21-ec6d-469a-9dde-bb6bfd5618cc
> Type: basic
> Technology: simple_bridge
> Num-Channels: 2
> Channel: SIP/tcu9tz-00000032
> Channel: SIP/c4i2zd-00000031
>
> Now with swagger UI on bridges section.
>
> POST /bridges/b1d8fb21-ec6d-469a-9dde-bb6bfd5618cc with type holding for
> example.
>
> 200 ok
>
> On asterisk CLI:
>
> xivo*CLI>  bridge show b1d8fb21-ec6d-469a-9dde-bb6bfd5618cc
> Id: b1d8fb21-ec6d-469a-9dde-bb6bfd5618cc
> Type: stasis
> Technology: holding_bridge
> Num-Channels: 0
>
> On swagger UI:
>
> DELETE /bridges/b1d8fb21-ec6d-469a-9dde-bb6bfd5618cc
>
> 204 ok
>
> On asterisk CLI:
>
> xivo*CLI>  bridge show b1d8fb21-ec6d-469a-9dde-bb6bfd5618cc
> Bridge 'b1d8fb21-ec6d-469a-9dde-bb6bfd5618cc' not found

I'd suggest filing an issue for this. You shouldn't be able to create a 
bridge from ARI with an id of one that already exists.

[1] http://lists.digium.com/cgi-bin/mailman/listinfo/asterisk-app-dev

-- 
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org