[asterisk-users] host parameter equivalent in pjsip.conf

[Matthew Jordan]

On Tue, Dec 8, 2015 at 10:29 AM, xaled <xaled at web.de> wrote:

> Hi,
>
>
>
> I’m trying to port our configuration form sip to pjsip channel and have
> following issue.
>
>
>
> Sip.conf has a host parameter that sets the RURI to a given value. This
> functionality is needed in some of our scenarios where we need to send
> requests to specific IP address with specific domain in RURI.
>
>
>
> I did not found an equivalent to the host parameter in pjsip
> configuration. Did I miss something?
>
>
>
> All I could come with is to get the Route header set to the needed value,
> but that does not help us in our scenarios. Below are relevant config
> settings and resulting SIP REGISTER Request.
>
>
>
> sip.conf:
>
>
>
> host=test.com
>
> outboundproxy=tcp://1.2.3.4
>
> fromuser=+12345678
>
> fromdomain=test.com
>
>
>
> REGISTER sip:test.com SIP/2.0
>
> From: <sip:+12345678 at test.com>;tag=as5152122a
>
> To: <sip:+12345678 at test.com>
>
> Contact: <sip:+12345678 at 4.3.2.1:5071;transport=TCP>
>
> User-Agent: Asterisk PBX 13.6.0
>
>
>
> pjsip.conf:
>
>
>
> client_uri = sip:+12345678 at test.com
>
> server_uri = sip:test.com
>
> outbound_proxy=sip:1.2.3.4\;transport=tcp
>
>
>
> REGISTER sip:1.2.3.4;transport=tcp SIP/2.0
>
> From: <sip:+12345678 at test.com>;tag=f47f3ed2-0975-4ff0-bd3b-bd5c38e594c4
>
> To: <sip:+12345678 at test.com>
>
> Contact: <sip:+12345678 at 4.3.2.1:60938>
>
> Route: <sip:test.com>
>
> User-Agent: Asterisk PBX 13.6.0
>
>
In order to preserve the request URI, you'll need to specify loose routing
on the SIP URI for the outbound proxy:

outbound_proxy=sip:1.2.3.4\;transport=tcp\;lr

-- 
Matthew Jordan
Digium, Inc. | Director of Technology
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: http://digium.com & http://asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20151208/5cae2773/attachment.html>