[asterisk-users] after upgrade buttons on Dahdi phones don't work [SOLVED]
mjordan at digium.com
Sun Dec 6 20:50:21 CST 2015
On Sat, Dec 5, 2015 at 1:17 PM, Greg Woods <greg at gregandeva.net> wrote:
> On Fri, Dec 4, 2015 at 12:50 PM, Greg Woods <greg at gregandeva.net> wrote:
>> the first numeric button press generates a fast busy. Inbound calls to
>> the Dahdi phones work just fine.
> I did some poking around and figured out that I could run something like
> "asterisk -r -d -d -d" and get more detailed debugging info. That produced
> [Dec 5 08:16:50] DEBUG[C-0000000b] sig_analog.c: waitfordigit
> returned '
> 8' (56), timeout = 0
> [Dec 5 08:16:50] DEBUG[C-0000000b] sig_analog.c: Can't match 8
> from '400
> 2' in context from-internal
> OK, so the fast busy comes as soon as asterisk can see that there is no
> extension that starts with '8'. The dahdi-channels.conf file does declare
> from-internal as the context for the channels those phones are connected
> to. And there is no from-internal context declared anywhere. So this makes
> What DOESN'T make sense is that this configuration *ever* worked. But it
> did, until the recent upgrade. The fix was to change "from-internal" to
> "internal" in dahdi-channels.conf . So that just leaves the question of how
> this configuration ever worked at all.
Sounds like you may have hit step 6...
Digium, Inc. | Director of Technology
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: http://digium.com & http://asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the asterisk-users