[asterisk-users] Cisco2811 - E1 Pri - Asterisk (solved)

[Administrator TOOTAI]

Le 18/12/2013 11:51, Administrator TOOTAI a écrit :
> Hi all,
>
> I face a strange problem. I'm in France using Completel as operator 
> for the E1 line. I move a client from ccm to Asterisk keeping the 2811 
> gateway.
>
> Set up is complete, outgoing and incoming calls are sended to the 
> 2811. The problem is that in 90% of the time I get a 500server error 
> back from 2811 when placing a call. Incoming calls are OK.
>
> The 2811 was configured in primary-4ess (?) for ccm. I changed it to 
> primary-net5. The ios is c2800nm-spservicesk9-mz.123-11.T5.bin
>
> If someone had any hint, would be great to share.
>

For the archives: problem was solved by adding a prefix on outgoing call 
to Cisco (eg 9) and adding in dial-peer voice xxx pots 
"destination-pattern 9T"

-- 
Daniel