[asterisk-users] PRI timing settings

Jeff LaCoursiere jeff at jeff.net
Wed Aug 20 12:38:08 CDT 2014


> Ok, here is an intense debug trace.  I've replaced the phone numbers 
> to protect the innocent.  The smoking gun seems to be this:
>
> Ext: 1  Cause: Destination out of order (27)
>
> Though I have no idea why... calling the same destination from my cell 
> phone works fine.  We only send seven digits for local "on-island" 
> calls like this, and calls to other carriers work fine with the same 
> format.  I'm starting to doubt there is anything I can do to fix 
> this... seems like an issue between my telco and Sprint?
>
> Cheers,
>
> j

[snip long trace]

 From here http://www.cnes.com/causecodes.html:

*Cause No. 27 - destination out of order [Q.850] *
This cause indicates that the destination indicated by the user cannot 
be reached because the interface to the destination is not functioning 
correctly. The term "not functioning correctly" indicates that a signal 
message was unable to be delivered to the remote party; e.g., a physical 
layer or data link layer failure at the remote party or user equipment 
off-line.

I am betting this is simply what my telco is sending because they were 
unable to pass the call on to Sprint.  It would be more informative 
perhaps to see what kind of trace the telco has of the handoff to 
Sprint.  I'm going to see if they will give it to me.

Cheers,

j
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140820/d01c8f32/attachment.html>


More information about the asterisk-users mailing list