[asterisk-users] Connecting Asterisk and BT Versatility PBX via NT BRI port

[Roberto Fichera]

On 08/04/2014 01:21 PM, David Duffett wrote:
>
> If the OpenVox card can supply the voltage, then it will a configuration option (probably in hardware, like some
> jumpers) of the card itself.
>

Yep! The OpenVOX card has a jumper for each port and a connector where to insert the external voltage supply device.

> I was going to point you to the Xorcom Astribank, which I know supplies the required voltage.
>

Ah! Ok! I was thinking you was giving me something like a temporary solution for supply the voltage to the PBX.

Cheers,
Roberto Fichera.

> All the best,
>
> David
>
> On 4 Aug 2014 13:16, "Roberto Fichera" <kernel at tekno-soft.it <mailto:kernel at tekno-soft.it>> wrote:
>
>     On 08/03/2014 04:37 PM, David Duffett wrote:
>>     Does the BT Versatility system you are trying to connect require a voltage on the line, which it would normally
>>     get from the BT connection?
>>
>>     Some BRI equipment does, and some does not, and it may be the Panasonic system you refer to is happy without the
>>     voltage, while, perhaps, the BT Versatility needs it.
>>
>>     If you find out that it does need the voltage, I do not think the OpenVox card you mentioned will supply it, but
>>     I can point you to a solution if required.
>
>     Just checked if the BT Versatility takes or not the voltage from the NT-1 and it does! So the problem looks really
>     this!
>
>     Can you point me to how supply voltage to the PBX while I'm waiting the given OpenVox adapter being delivered?
>
>     Cheers,
>     Roberto Fichera.
>
>>
>>     All the best,
>>
>>
>>
>>     On Sunday, August 3, 2014, Mc GRATH Ricardo <mcgrathr at mail2web.com <mailto:mcgrathr at mail2web.com>> wrote:
>>
>>         Hi, it seems have problem with physical issue layer 1, first check wiring connection, by the way  you can
>>         check with card led (If ISDN  plugs into the port, the LED will not blink, but in red color.) after  dahdi
>>         alarm status, and dahdi restart command.
>>         At last should be signalling mode to signalling = bri_cpe_ptmp
>>         Good luck
>>
>>         Mc GRATH Ricardo
>>         E-Mail mcgrathr at mail2web.com
>>         --
>>         _____________________________________________________________________
>>         -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>         New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                        http://www.asterisk.org/hello
>>
>>         asterisk-users mailing list
>>         To UNSUBSCRIBE or update options visit:
>>            http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>     -- 
>>     Digium logo
>>     *David Duffett*
>>     Digium, Inc. · Director, Worldwide Asterisk Community
>>     6 Landscape Close, Weston on the Green · Bicester, Oxfordshire OX25 3SX · UK
>>     direct/fax: +1 256 428 6119 · mobile: +44 7722 442236
>>     twitter: dduffett · linkedin: www.linkedin.com/in/davidduffett <http://www.linkedin.com/in/davidduffett> 
>>     Check us out at: http://digium.com <http://digium.com/> · http://asterisk.org <http://www.asterisk.org/>  
>>
>>
>>
>
>
>     --
>     _____________________________________________________________________
>     -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>     New to Asterisk? Join us for a live introductory webinar every Thurs:
>                    http://www.asterisk.org/hello
>
>     asterisk-users mailing list
>     To UNSUBSCRIBE or update options visit:
>        http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140804/a0d131b2/attachment.html>