[asterisk-users] Connecting Asterisk and BT Versatility PBX via NT BRI port
dduffett at digium.com
Sun Aug 3 09:37:21 CDT 2014
Does the BT Versatility system you are trying to connect require a voltage
on the line, which it would normally get from the BT connection?
Some BRI equipment does, and some does not, and it may be the Panasonic
system you refer to is happy without the voltage, while, perhaps, the BT
Versatility needs it.
If you find out that it does need the voltage, I do not think the OpenVox
card you mentioned will supply it, but I can point you to a solution if
All the best,
On Sunday, August 3, 2014, Mc GRATH Ricardo <mcgrathr at mail2web.com> wrote:
> Hi, it seems have problem with physical issue layer 1, first check wiring
> connection, by the way you can check with card led (If ISDN plugs into
> the port, the LED will not blink, but in red color.) after dahdi alarm
> status, and dahdi restart command.
> At last should be signalling mode to signalling = bri_cpe_ptmp
> Good luck
> Mc GRATH Ricardo
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
[image: Digium logo]
Digium, Inc. · Director, Worldwide Asterisk Community
6 Landscape Close, Weston on the Green · Bicester, Oxfordshire OX25 3SX · UK
direct/fax: +1 256 428 6119 · mobile: +44 7722 442236
twitter: dduffett · linkedin: www.linkedin.com/in/davidduffett
Check us out at: http://digium.com · http://asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the asterisk-users