[asterisk-users] IAX2 Trunk Encryption

Steve Totaro stotaro at totarotechnologies.com
Fri Apr 4 19:07:40 CDT 2014


Have you enabled IAX2 debugging and tried some test calls?

Thanks,
Steve T


On Fri, Apr 4, 2014 at 6:59 PM, Elliott W <digium at private-address.info>wrote:

> That answered my question as to whether it WAS encrypted, I think, and the
> answer is no, the credentials are but all the rest is not.  That just
> leaves the question of what I need to do to get it encrypted..
>
> Thanks.
>
>
> On Fri, Apr 4, 2014 at 12:59 PM, Steve Totaro <
> stotaro at totarotechnologies.com> wrote:
>
>> Wireshark.
>>
>>
>>
>> On Fri, Apr 4, 2014 at 11:13 AM, Elliott W <digium at private-address.info>wrote:
>>
>>> Ok, I think I am 90%+ there.
>>>
>>> Note: the configuration or status is the same on both sides unless
>>> otherwise noted.
>>>
>>> I am using RSA keys for authentication and the calls are coming through
>>> as authenticated so I'm sure that part works.
>>>
>>> The peer shows the "(E)" next to the status in Asterisk Info for the
>>> IAX2 peers
>>>
>>> The trunk configuration contains:
>>> encryption=yes
>>>
>>> So here is my question, Calls stop flowing when I use the directive:
>>> forceencryption=yes
>>> At the trunk level or higher does not matter, same effect.
>>>
>>> So my question comes down to, are my calls getting encrypted and why
>>> does this directive cause them to fail, AND how can I tell.
>>>
>>> Thanks.
>>>
>>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140404/8944dd9f/attachment.html>


More information about the asterisk-users mailing list