[asterisk-users] IAX2 Trunk Encryption

[Steve Totaro]

Wireshark.


On Fri, Apr 4, 2014 at 11:13 AM, Elliott W <digium at private-address.info>wrote:

> Ok, I think I am 90%+ there.
>
> Note: the configuration or status is the same on both sides unless
> otherwise noted.
>
> I am using RSA keys for authentication and the calls are coming through as
> authenticated so I'm sure that part works.
>
> The peer shows the "(E)" next to the status in Asterisk Info for the IAX2
> peers
>
> The trunk configuration contains:
> encryption=yes
>
> So here is my question, Calls stop flowing when I use the directive:
> forceencryption=yes
> At the trunk level or higher does not matter, same effect.
>
> So my question comes down to, are my calls getting encrypted and why does
> this directive cause them to fail, AND how can I tell.
>
> Thanks.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140404/dc337261/attachment.html>