[asterisk-users] sipgate outgoing calls

[gpxctawjc5oh at irational.org]

On Thu, 19 Sep 2013, David Duffett wrote:


i am getting these errors in asterisk cli

     -- Executing [01179553708 at default:1] Set("SIP/xxxx-0000015b", 
"CALLERID(num)=xxxxxx") in new stack
     -- Executing [01179553708 at default:2] Dial("SIP/xxxx-0000015b", 
"SIP/01179553708 at sipgate,30,trg") in new stack
   == Using SIP RTP CoS mark 5
   == Using SIP VRTP CoS mark 6
     -- Called 01179553708 at sipgate
[Sep 19 10:08:03] NOTICE[28232]: chan_sip.c:17885 handle_response_invite: 
Failed to authenticate on INVITE to '"xxxx" 
<sip:xxxxx at sipgate.co.uk>;tag=as055d9532'
     -- SIP/sipgate-0000015c is circuit-busy
   == Everyone is busy/congested at this time (1:0/1/0)

any further ideas ?

many thanks

> 
> I believe registration is in place, otherwise inbound calls would not work.
> 
> Also, registration is not required for outbound calls to work.
> 
> I would suggest cutting down your sip.conf profile to this minimal
> configuration:
> 
> host=sipgate.co.uk
> username=xxxxxxx
> fromuser=xxxxxxx
> insecure=invite,port
> secret=xxxxxxx
> context=my-inbound-context
> type=peer
> 
> If outbound calls still do not with this, I would suggest that there may be
> an issue in the general section of your sip.conf
> 
> Assuming calls do work, you can then add any other configuration lines you
> feel are necessary - but remember, as with all Asterisk configuration files,
> less is more :-)
> 
> On 18 Sep 2013 22:06, "Administrator TOOTAI" <admin at tootai.net> wrote:
>       Le 18/09/2013 15:29, gpxctawjc5oh at irational.org a écrit :
>             Hello
> 
>
>       Hi
> 
>
>             i am trying to setup sipgate gateway
>
>             i can get incoming calls fine, but when i dial in and
>             then try to dial
>             out i get this in asterisk command line
>
>             -- Called 01179248615 at sipgate
>             [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885
>             handle_response_invite: Failed to authenticate on
>             INVITE to
>             '"01179553708"
>             <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1'
>                 -- SIP/sipgate-0000014d is circuit-busy
>               == Everyone is busy/congested at this time
>             (1:0/1/0)
> 
>
>             here is my sip.conf file
> 
>
>             [general]
>             port = 5060
>             bindaddr = 0.0.0.0
>             context=default
>             qualify=no
>             disallow=all
>             allow=alaw
>             allow=ulaw
>             allow=g729
>             allow=gsm
>             allow=slinear
>             srvlookup=yes
>             videosupport=yes
>             alwaysauthreject=yes
>
>             register => SIP-ID:SIP-Password at sipgate.co.uk/SIP-ID
>
>             [sipgate]
>             type=peer
>             secret=SIP_PASSWORD
>             insecure=invite
>             username=SIP-ID
>             defaultuser=SIP-ID
>             fromuser=SIP-ID
>             context=sipgate_in
>             fromdomain=sipgate.co.uk
>             host=sipgate.co.uk
>             outboundproxy=proxy.live.sipgate.co.uk
>             qualify=yes
>             disallow=all
>             allow=alaw
>             dtmfmode=rfc2833
> 
>
>             SIP-ID:SIP-Password
>             obviously, i replace these with my login details
>
>             but, are these the same thing ?
>             SIP-Password
>             SIP_PASSWORD
>
>             the sipgate guides are contradictory
>
>             http://www.sipgate.com/faq/article/394/How_do_I_configure_Asterisk
>             http://www.live.sipgate.co.uk/faq/article/508/How_do_I_configure_Asteri
>             sk
> 
>
>             any suggestions ?
>
>             Many thanks
> 
>
>       My setup with sipgate.de
>
>       [sipgate]
>       type=peer
>       secret=MY-PASSWORD
>       defaultuser=SIP-ID
>       host=217.10.79.9
>       fromuser=SIP-ID
>       fromdomain=sipgate.de
>       context=incoming-sipgate
>       ;qualify=900
>       dtmfmode=info
>       directmedia=yes
>       insecure=port,invite
>       disallow=all
>       allow=ulaw,alaw
>       accountcode=MY-ACCOUNTCODE
>
>       What you forget is to register with them:
>
>       ; Sipgate
>       register => SIP-ID:MY-PASSWORD at sipgate.de/SIP-ID ;don't accept to
>       register without FQDN
>
>       Hope that help
>
>       --
>       Daniel
>
>       --
>       _____________________________________________________________________
>       -- Bandwidth and Colocation Provided by
>       http://www.api-digital.com --
>       New to Asterisk? Join us for a live introductory webinar every
>       Thurs:
>                     http://www.asterisk.org/hello
>
>       asterisk-users mailing list
>       To UNSUBSCRIBE or update options visit:
>         http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
>