[asterisk-users] dial and bridge

Ioan Indreias indreias at gmail.com
Wed May 15 08:29:56 CDT 2013


I think you could use twice the Park action to park the channels ->
https://wiki.asterisk.org/wiki/display/AST/ManagerAction_Park

In the end you will have to bridge the parked channels.

HTH,
Ioan


On Wed, May 15, 2013 at 1:03 PM, Lenz Emilitri <lenz.loway at gmail.com> wrote:

> I never actually used parking, but should it work if I call the Park
> application as the second leg of the Originate (w/o going through the
> dialplan)? I dont seem to be able to make it work.
> l.
>
>
> 2013/5/15 Mitul Limbani <mitul at enterux.in>
>
>> The dial n bridge might work, but there ain't indefinite wait in that
>> scenario.
>> Direct calls to parking you might try Local(70X at from-internal) but I m
>> not sure if this method works reliably.
>>
>> The method I mentioned is used by vicidial and it works flawlessly, yes
>> it comes with some computing load, however you can try the newer ConfBridge
>> app to see if its cheaper.
>>
>> Mitul
>>
>> On Wednesday, May 15, 2013, Lenz Emilitri wrote:
>>
>>> Hi Mitul,
>>> I agree that the dialplan way is easier, but it's a client requirement
>>> to avoid using it. I was wondering if there was a way to send a call
>>> directly to a parking slot right from the originate, because that is
>>> cheaper than running conferences, and then joining the second call right to
>>> the parked call, so that all we have to do is two originates.
>>> l.
>>>
>>>
>>> 2013/5/14 Mitul Limbani <mitul at enterux.in>
>>>
>>>> Dial first call and put it into a conference, then dial second call and
>>>> put him into same conference to bridge both.
>>>>
>>>> However dial plan way is much more simpler.
>>>>
>>>> Mitul
>>>>
>>>>
>>>> On Tuesday, May 14, 2013, Lenz Emilitri wrote:
>>>>
>>>>>
>>>>> Hi all,
>>>>> I need some advice - I have been working on originating multiple calls
>>>>> using AMI and then joining them.
>>>>> What I want to do is:
>>>>> - dial call 1 (where the caller is in a "channel" format, like
>>>>> SIp/1234 or Local/1234 at ext) and "park" it somehow
>>>>> - dial call 2 (where again the caller is in channel format) and join
>>>>> it to the previous call.
>>>>>
>>>>> As a requirement, I cannot use the dialplan as an end-point (as I
>>>>> cannot change it) but need to use the AMI only.
>>>>>
>>>>> I tried doing something like:
>>>>>
>>>>> Action: Originate
>>>>> Channel: Local/300 at from-internal
>>>>> Async: 1
>>>>> Application: Wait
>>>>> Data: 1973
>>>>>
>>>>> So that the call goes to 300 and then basically stays there forever,
>>>>> and then I dial again:
>>>>>
>>>>> Action: Originate
>>>>> Channel: Local/500 at from-internal
>>>>> Async: 1
>>>>> Application: Wait
>>>>> Data: 1973
>>>>>
>>>>> And then try to bridge the results, but it does not seem to work.
>>>>> What I would like to do would be more on the lines of:
>>>>>
>>>>> Originate call 1 and park it (using a park or waiting)
>>>>> Originate call 2 and bridge it immediately to call1 (using the
>>>>> Application part)
>>>>>
>>>>> But maybe I am missing something? is there anybody who has better
>>>>> suggestions?
>>>>>
>>>>> Thanks
>>>>> l.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Loway - home of QueueMetrics - http://queuemetrics.com
>>>>> Test-drive WombatDialer beta @ http://wombatdialer.com
>>>>>
>>>>
>>>>
>>>> --
>>>> Regards,
>>>> Mitul Limbani,
>>>> Chief Architech & Founder,
>>>> Enterux Solutions Pvt. Ltd.
>>>> 110 Reena Complex, Opp. Nathani Steel,
>>>> Vidyavihar (W), Mumbai - 400 086. India
>>>> http://www.enterux.com/
>>>> http://www.entvoice.com/
>>>> email: mitul at enterux.in
>>>> DID: +91-22-71967121
>>>> Cell: +91-9820332422
>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>                http://www.asterisk.org/hello
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>>
>>>
>>> --
>>> Loway - home of QueueMetrics - http://queuemetrics.com
>>> Test-drive WombatDialer beta @ http://wombatdialer.com
>>>
>>
>>
>> --
>> Regards,
>> Mitul Limbani,
>> Chief Architech & Founder,
>> Enterux Solutions Pvt. Ltd.
>> 110 Reena Complex, Opp. Nathani Steel,
>> Vidyavihar (W), Mumbai - 400 086. India
>> http://www.enterux.com/
>> http://www.entvoice.com/
>> email: mitul at enterux.in
>> DID: +91-22-71967121
>> Cell: +91-9820332422
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
> --
> Loway - home of QueueMetrics - http://queuemetrics.com
> Test-drive WombatDialer beta @ http://wombatdialer.com
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130515/024c7f9f/attachment.htm>


More information about the asterisk-users mailing list