[asterisk-users] Cisco 7942G and SEPMAC.cnf.xml and the registration

[Mark Henry]

Hi,

I have this for UAE,

        <dateTimeSetting>
            <dateTemplate>D/M/YA</dateTemplate>
            <timeZone>Arabian Standard Time</timeZone>
            <ntps>
                <ntp>
                    <name>2.2.2.2</name>
                    <ntpMode>Unicast</ntpMode>
                </ntp>
            </ntps>

and this for Kenya

http://wwp.greenwichmeantime.com/time-zone/gmt-plus-3/ my Kenya(Saudia
Arabia time zone) will work for you as it is same as Kuwait

        <dateTimeSetting>
            <dateTemplate>D/M/YA</dateTemplate>
            <timeZone>Saudi Arabia Standard Time</timeZone>
            <ntps>
                <ntp>
                    <name>2.2.2.2</name>
                    <ntpMode>Unicast</ntpMode>
                </ntp>
            </ntps>
        </dateTimeSetting>

For other references, cisco phones also have tz time zones

Like I have this for US daylight time

    <tzdata>
<tzolsonversion>2010i</tzolsonversion>
<tzupdater>tzupdater.jar</tzupdater>
 </tzdata>
<dateTimeSetting>
<dateTemplate>D/M/YA</dateTemplate>
 <timeZone>Eastern Standard/Daylight Time</timeZone>
<olsonTimeZone>America/New_York</olsonTimeZone>
 <ntps>
<ntp>
<name>2.2.2.2</name>
 <ntpMode>Unicast</ntpMode>
</ntp>
</ntps>
 </dateTimeSetting>


I have experienced some 7940,7942 7965 hanging and couldn't found any
reason but that was resolved by using those in sip tcp mode instead of udp

Also, I am using this patch of asterisk which made these phones work
perfectly for softkeys, call transfers, 3 way conferencing and connected
caller id

https://issues.asterisk.org/jira/browse/ASTERISK-13145


On Sat, Mar 23, 2013 at 7:19 AM, Vladimir Mikhelson <vlad at mikhelson.com>wrote:

> Bilal,
>
> Here is the respective section from my working 7906 .conf file:
>
>    <dateTimeSetting>
>       <dateTemplate>M/D/Ya</dateTemplate>
>       <timeZone>Central Standard/Daylight Time</timeZone>
>       <ntps>
>          <ntp>
>             <name>172.29.100.11</name>
>             <ntpMode>Unicast</ntpMode>
>          </ntp>
>       </ntps>
>    </dateTimeSetting>
>
> 172.29.100.11 is my local sntp server.
>
> Hope that helps.
>
> Thank you,
> Vladimir
>
>
>
> On 3/20/2013 12:13 PM, bilal ghayyad wrote:
> > Hello;
> >
> > The phones are registering now. I found a SEPMAC.cnf.xml file and I used
> sip firmware version 8.3 and I configured nat=no at sip.conf and nat to be
> false in xml file.
> >
> > But I am facing a time problem, I am in Kuwait country and the time that
> is appearing at the Phones screen is delayed by 3 hours. Kuwait time is
> GMT+3.
> >
> > Anyone can help?
> >
> > Now I am placing the following in the xml file (but I am sure it needs
> to be corrected, how I do not know):
> >
> > <dateTimeSetting>
> > <dateTemplate>D/M/Y</dateTemplate>
> > <timeZone>Kuwait</timeZone>
> > <ntps>
> > <ntp>
> > <name>pool.ntp.org</name>
> > <ntpMode>Unicast</ntpMode>
> > </ntp>
> > </ntps>
> > </dateTimeSetting>
> >
> >
> >
> > Regards
> > Bilal
> >
> > ------------
> >> Hello;
> >>
> >> I am facing a problem to let Cisco IP Phone 7942G register
> >> on Asterisk. The firmware has been downloaded from the TFTP
> >> successfully and currently I am running this load
> >> SIP42.9-3-1SR2-1S*
> >>
> >> I feel that there is a problem in the SEPMAC.cnf.xml but
> >> really I do not know which one to be used exactly.
> >> Basically, there is some effect that appears on the Phone
> >> (for example, it is appearing the extension on the button),
> >> but the Phone is not able to register. I tried to ssh or
> >> even http or https to the phone but I can not access it.
> >> Although I configured the ssh in the SEPMAC.cnf.xml as
> >> following:
> >>
> >> <sshUserId>admin</sshUserId>
> >> <sshPassword>cisco</sshPassword>
> >>
> >> Anyone tried to register Cisco 7942G on Asterisk? Which
> >> SEPMAC.cnf.xml was used?
> >>
> >> How I can access the Phone via ssh or http to be able to see
> >> the logs and understand what is happening?
> >>
> >> By the way: this SEPMAC.cnf.xml is existed on cisco website?
> >> Is it specialized for each Phone type (does it differs from
> >> Cisco IP Phone 7940 to 7942 to 7960)?
> >>
> >> Appreciate the help as really I am sticked at this point and
> >> not able to moveforward.
> >>
> >> Thanks in advance.
> >> Regards
> >> Bilal
> > --
> > _____________________________________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> > New to Asterisk? Join us for a live introductory webinar every Thurs:
> >                http://www.asterisk.org/hello
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130324/dd0bf675/attachment.htm>