[asterisk-users] AGI Script

[Gustavo Salvador]

Hi Steve, thanks.


.Did that include 'agi set debug on?'

> *Yes, that include this command*.
>


> Can you 'cut-n-paste' the relevant 'sanitized' console output?
> *Ok. This is*:
>
 trixbox146002*CLI>
    -- Launched AGI Script /var/lib/asterisk/agi-bin/agi-test.agi
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_request: agi-test.agi
<SIP/INCONCERT-000035d2>AGI Tx >> agi_channel: SIP/INCONCERT-000035d2
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_language: en
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_type: SIP
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_uniqueid: 1362669295.35561
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_version: 1.6.0.28-samy-r100
<SIP/INCONCERT-000035d2>AGI Tx >> agi_callerid: 1044
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_calleridname: 1044
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_callingpres: 0
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_callingani2: 0
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_callington: 0
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_callingtns: 0
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_dnid: 701820101044
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_rdnis: unknown
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_context: ModernaDesv_E1
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_extension: s
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_priority: 3
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_enhanced: 0.0
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_accountcode:
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >> agi_threadid: 29367216
trixbox146002*CLI>
<SIP/INCONCERT-000035d2>AGI Tx >>
trixbox146002*CLI>
[Mar  7 10:14:55] NOTICE[32548]: channel.c:3051 __ast_read: Dropping
incompatible voice frame on SIP/INCONCERT-000035d2 of format ulaw since our
native format has changed to 0x8 (alaw)
trixbox146002*CLI>
    -- <SIP/INCONCERT-000035d2>AGI Script agi-test.agi completed, returning
0

I looked through my AGIs and find I always set channel variables and let
> the dialplan do the actual dial().
>
> 1) Is your AGI exiting before the dial() completes?
> *Yes.*
>


> 2) If you execute the same dial() command from the 'AGI debug output'
> (which should show the expanded variables) in your dialplan, does that
> yield andy clues?
>
*How I do that? I just use the AMI command originate. Executing this with
the protocol already works, but not ring.*

>
> 3) If you use another technology like SIP can you enable SIP debugging and
> observe the SIP dialog?
> *I can not use SIP because the call goes out to E1.*
>
>
Regards,

Gustavo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130307/8d2f4038/attachment-0001.htm>