No subject

/*! \brief Wait up to 16 seconds for first digit (FXO logic) */ static int =
firstdigittimeout =3D 16000;

/*! \brief How long to wait for following digits (FXO logic) */ static int =
gendigittimeout =3D 8000;

/*! \brief How long to wait for an extra digit, if there is an ambiguous ma=
tch */ static int matchdigittimeout =3D 3000;


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounce=
s at lists.digium.com] On Behalf Of Justin Killen
Sent: Wednesday, July 10, 2013 3:55 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] analog phone digit delay

So then, by saying "If the digits already dialed match an extension in the =
dialplan...wait 3 seconds...", then we're saying that asterisk has found a =
match, and the match is the bad-extension.  Here is the bad-number context =
that is included:

=20

[bad-number]

include =3D> bad-number-custom

exten =3D> _X.,1,Noop(bad-number, timeouts: absolute: ${TIMEOUT(absolute)} =
digit: ${TIMEOUT(digit)} response: ${TIMEOUT(response)})

exten =3D> _X.,n,ResetCDR()

exten =3D> _X.,n,NoCDR()

exten =3D> _X.,n,Progress

exten =3D> _X.,n,Wait(1)

exten =3D> _X.,n,Progress

exten =3D> _X.,n,Playback(silence/1&cannot-complete-as-dialed&check-number-=
dial-again,noanswer)

exten =3D> _X.,n,Wait(1)

exten =3D> _X.,n,Congestion(20)

exten =3D> _X.,n,Hangup

=20

=20

=20

So then, what you're saying then is that if I was to remove this include, t=
here would be no match in the dialplan and asterisk will wait for 8 seconds=
 instead of 3?  The next question then is how to accomplish this without us=
ing the wildcard (and how to change it in freepbx).

=20

-Justin=20

________________________________

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounce=
s at lists.digium.com] On Behalf Of Richard Mudgett
Sent: Wednesday, July 10, 2013 10:22 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] analog phone digit delay

=20

=20

=20

On Mon, Jul 8, 2013 at 12:14 PM, Justin Killen <jkillen at allamericanasphalt.=
com> wrote:

I have an installation that has analog phones connected via T1 channel bank=
s.  I'm getting complaints from users that they will enter a partial number=
 (eg 91213), then turn away to get the next few digits, and the system will=
 start dialing before they have a chance to put in the rest of the dialing =
string.  Is there a way to increase this delay?  The only use these 4 diali=
ng patterns:

=20

Internal 3 digit numbers

91 XXX XXX XXXX   (for backwards compatibility)

9 XXX XXXX (also for compatibility)

XXX XXXX

=20

The simple switch in chan_dahdi has two hardcoded timeout times for more di=
gits.

 1) If the digits already dialed match an extension in the dialplan but cou=
ld match another extension if more digits are dialed then chan_dahdi will w=
ait 3 seconds for more digits to arrive.

2) If the digits already dialed do not match any extension in the dialplan =
but more digits could match an extension then chan_dahdi will wait 8 second=
s for more digits.

The shorter timeout is so the caller won't have to wait too long if the cal=
ler intends to call the shorter dialplan extension.

You need to look at the extension patterns in your dialplan to see where yo=
u have ambiguity between extensions.  Are you using the '.' wildcard?

=20

Richard

=20


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New t=
o Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New t=
o Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New t=
o Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New t=
o Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users