[asterisk-users] Handoff dial control to dialplan after AMI Originate

[Satish Barot]

On Wed, Jun 19, 2013 at 4:00 PM, Grant Bagdasarian <GB at cm.nl> wrote:

> Why can’t I execute any more dialplan after the Dial application? The
> scenario is when the Dial application dials the recipient but the recipient
> doesn’t answer. The AMI will never go into the originateDialProcessor
> because the call was never answered. So I expect the Dialplan to continue
> after the Dial application has reached its timeout.****
>
> ** **
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Grant Bagdasarian
> *Sent:* Wednesday, June 19, 2013 11:24 AM
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Handoff dial control to dialplan after
> AMI Originate****
>
> ** **
>
> I fixed it. The problem is just as I assumed; once the call is answered
> the dialplan goes into what’s defined in Context/Exten/Prio of the
> Originate action.****
>
> ** **
>
> I changed the Context/Exten/Prio in the action and pointed it to something
> else. Now it works.****
>
> ** **
>
> Action: Originate****
>
> Channel: Local/outbound1 at originateDialContext****
>
> CallerID: 00311234567****
>
> Context: originateDialProcessor****
>
> Exten: outbound1****
>
> Priority: 1****
>
> Variable: recipient=0031612345678****
>
> Timeout: 10000****
>
> ** **
>
> [originateDialContext]****
>
> exten => outbound1,1,Wait(1)****
>
> exten => outbound1,n,Set(recipient=${recipient})****
>
> exten => outbound1,n,Dial(SIP/${recipient}@originateChannel)****
>
> ** **
>
> [originateDialProcessor]****
>
> exten => outbound1,1,Wait(1)****
>
> exten => outbound1,n,NoOp(${DIALSTATUS})****
>
> exten => outbound1,n,Hangup****
>
> ** **
>
> *From:* asterisk-users-bounces at lists.digium.com [
> mailto:asterisk-users-bounces at lists.digium.com<asterisk-users-bounces at lists.digium.com>]
> *On Behalf Of *Lenz Emilitri
> *Sent:* Wednesday, June 19, 2013 10:10 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Handoff dial control to dialplan after
> AMI Originate****
>
> ** **
>
> Looks correct to me....****
>
> ** **
>
> 2013/6/19 Grant Bagdasarian <GB at cm.nl>****
>
> Hello,****
>
>  ****
>
> I’d like to use the AMI interface to originate a call to a context in a
> dialplan, and handoff the dial control to the context.****
>
>  ****
>
> Whenever I execute the below action, the recipient does ring, but when I
> answer it dials the recipient again. I believe this is because once
> answered the system is going to execute the Context/Exten/Prio in the
> Originate action?****
>
>  ****
>
> Action: Originate****
>
> Channel: Local/outbound1 at originateDialContext****
>
> CallerID: 00311234567****
>
> Context: originateDialContext****
>
> Exten: outbound1****
>
> Priority: 1****
>
> Variable: recipient=0031612345678****
>
> Timeout: 10000****
>
>  ****
>
> [originateDialContext]****
>
> exten => outbound1,1,Wait(1)****
>
> exten => outbound1,n,Set(recipient=${recipient})****
>
> exten => outbound1,n,Dial(SIP/${recipient}@originateChannel)****
>
>  ****
>
> Anyone have an idea how to fix this?****
>
>
> --
>

You need a special extension 'failed' in a context originateDialProcessor
to catch the control when call doesn't get answered in first leg.

[originateDialProcessor]

exten => outbound1,1,Wait(1)

exten => outbound1,n,NoOp(${DIALSTATUS})
exten => outbound1,n,Hangup

exten => failed,1,NoOp(----- CALL DIDN'T GET ANSWERED IN FIRST LEG -----)

--Satish Barot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130619/0eb075b5/attachment.htm>