[asterisk-users] how to send dtmf after pause ?

[Sean Darcy]

On 06/07/2013 01:48 PM, Asghar Mohammad wrote:
> hi,
> you can add more w (wwwwwwwwww1234#) for more delay.
>
>
>
> On Fri, Jun 7, 2013 at 7:17 PM, Yves A. <yves030 at gmx.de
> <mailto:yves030 at gmx.de>> wrote:
>
>     This would be possible with an agi...
>     the agi can wait for silence or 10 seconds, as u like and then play
>     the dtmf tones and bridge the call to your extension afterwards.
>
>     yves
>
>     Am 07.06.2013 17:51, schrieb Sean Darcy:
>
>
>         I'm trying to call a conference service, wait 10 seconds, then
>         send the passcode.
>
>         I've tried ww:
>
>         Dial(SIP/18005551212ww12345#@s__ip.com <http://sip.com>,60,r)
>
>         The sip channel didn't like that. Added 'p' , still no help.
>
>         I tried D:
>
>         Dial(SIP/18005551212 at sip.com
>         <mailto:18005551212 at sip.com>,__60,rD(12345#)
>
>         The dtmf is sent too soon. I tried inserting 'ww' but that was
>         just sent.
>
>         I tried G:
>
>         exten => 234.1.Dial(SIP/18005551212 at __sip.com
>         <mailto:18005551212 at sip.com>,60,rG(next))
>           same=>n(next),Wait(10)
>           same=>n,SendDTMF(12345#)
>
>         but that didn't work at all,
>
>         This is a common use case. There must be some simple answer I'm
>         missing.
>
>         Thanks for any help.
>
>         sean
>
>
>

Thanks for the reply, but any 'w' s in the dial string cause 
CHAN_UNAVAILABLE.

I'm not sure I'm up for learning agi just yet. I was hoping for a 
dialplan solution.

sean