[asterisk-users] G.729 codec in pass-thru mode

[Matthew J. Roth]

Kamlesh Kumar wrote:
> 
> allow=all is defined in sip.conf for the ITSP's SIP peer. Additionally, ITSP
> supports g729 codec as we are able to send the traffic from other soft switch.


There must be some difference between your Asterisk servers.  Please set them
up for calling the ITSP with G.729 and provide the following CLI output from
both of them.  Be sure to preserve any differences when obscuring IP addresses
and label the output clearly as "G.729 working" and "G.729 fails".

  CLI> core show version
  CLI> sip show settings
  CLI> sip show peer 100
  CLI> sip show peer <ITSP's SIP peer>
  CLI> g729 show licenses

Regards,

Matthew Roth
InterMedia Marketing Solutions
Software Engineer and Systems Developer