[asterisk-users] Queue questions - Asterisk 11

[Administrator TOOTAI]

Le 04/07/2013 07:29, Satish Barot a écrit :
> [...]
>
>     Already tested, I tried again as the option passed to queue was
>     changed (n option)
>
>     Logs:
>
>         -- Started music on hold, class 'default', on SIP/gw-0000005e
>         -- Executing [909 at memberconnector:1] Dial("Local/909@
>     memberconnector-00000002;2", "SIP/s-ntfe_909,60,") in new stack
>       == Using SIP RTP CoS mark 5
>         -- Called SIP/s-ntfe_909
>         -- SIP/s-ntfe_909-00000060 is ringing
>         -- Local/909 at memberconnector- 00000002;1 is ringing
>         -- SIP/s-ntfe_909-00000060 is ringing
>         -- Stopped music on hold on SIP/gw-0000005e
>       == Spawn extension (macro-toQueue, s, 11) exited non-zero on
>     'SIP/gw-0000005e' in macro 'toQueue'
>       == Spawn extension (incoming-Swiss-itech, 10000, 204) exited
>     non-zero on 'SIP/gw-0000005e'
>         -- Executing [h at incoming-Swiss-itech:1]
>     NoOp("SIP/gw-0000005e", "Call ended with QUEUESTATUS= and
>     DIALSTATUS= and HANGUPCAUSE=0") in new stack
>
>     >From extension:
>
>     [memberconnector]
>     ;
>     exten => _XXX,1,Dial(SIP/${peerPrefix}$ {EXTEN},${TIMERINGQUEUE},)
>           same => n,NoOp(DIALSTATUS=${ DIALSTATUS})
>
>     As you can see, all status are empty,
>
>
>     -- 
>     Daniel
>
>
>
> QUEUESTATUS will contain different values in different scenarios. i.e. 
> If a call gets answered then the value is CONTINUE, If a call doesn't 
> get answered and Queue timeout happens then TIMEOUT. If a caller hangs 
> up when call is in Queue then QUEUESTATUS will be blank.
>
> Have something like this,
> ... ...
> same => n,queue(support,c,,,20)
> same => n,Noop(QSTATUS=${QUEUESTATUS})
> ... ...
> exten => h,1,Noop(QSTATUS=${QUEUESTATUS})
>
> [memberconnector]
> exten => _X.,1,Noop(Connecting to Member at ${EXTEN})
> same => n,Dial(SIP/${EXTEN})
> ;Check the Dialstatus for Member
> same => n,Noop(DIALSTATUS=${DIALSTATUS})
>
> exten => h,1,Noop(DIALSTATUS=${DIALSTATUS})
>

Hi Satish,

the c option has a result of DIALSTATUS shown on h extension in 
[memberconnector] and _only_ here. I then have to put the result in a 
global variable as DIALSTATUS is resetted.

Many thanks for your help

Regards

-- 
Daniel