[asterisk-users] Issue after upgrade to 1.8.20 - Unable to connect to remote asterisk message on service asterisk start

[Bakko]

me too.

regards

El 16/01/2013 13:25, Eric Wieling escribió:
> I am also experiencing this issue.  Asterisk is in fact running, you can verify by running "asterisk -rvvv" (-r connects to an EXISTING asterisk process) or using ps.
>
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Warren Selby
> Sent: Wednesday, January 16, 2013 1:21 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [asterisk-users] Issue after upgrade to 1.8.20 - Unable to connect to remote asterisk message on service asterisk start
>
> I'm trying to decide if I need to open an issue for this or if it's just a misconfiguration issue of some sort.  Here's the situation - yesterday morning, I downloaded asterisk 1.8.19.1 and installed it on a fresh CentOS 5.8 installation and got a shell of a basic asterisk install setup (minimum required configuration files, etc, with no dialplan or sip peers setup yet).  In the afternoon, I got the notification that asterisk 1.8.20.0 had been released, so today, I downloaded the latest 1.8-current.tar.gz and compiled and installed it (./configure, make menuselect and choose all the same options as my previous install, make, make install).
>
>
> Now, when I start the asterisk service using "service asterisk start" from the command line, this is the output:
>
> [root at pbx ~]# service asterisk start
> Unable to connect to remote asterisk (does /var/run/asterisk/asterisk.ctl exist?) Starting asterisk:
>
>
> However, the /var/run/asterisk/asterisk.ctl file is being created and the process is starting:
>
> [root at pbx ~]# ls -lh /var/run/asterisk/
> total 4.0K
> srwxr-xr-x 1 root root 0 Jan 16 12:07 asterisk.ctl
> -rw-r--r-- 1 root root 6 Jan 16 12:07 asterisk.pid
>
>
> However, I'm no longer getting the usual splash message when I connect to the asterisk console...this is what I get:
>
> [root at pbx ~]# asterisk -r
> Verbosity is at least 3
> pbx*CLI>
>
>
> I don't have any peers setup yet, or even any dialplan configured to test, but when I go through the logs, I don't find any errors or warnings that I'm not expecting.
>
>
> I've gone back to the asterisk 1.8.19.1 install and everything works as expected (no error messages, full splash about license / version on connection to console, etc).  I performed make clean in my 1.8.20 source directory, then ./configure, make menuselect, make, make install, and even make config, and I'm still seeing this message pop up when restarting / starting the service.
>
>
> I went through the CHANGELOG.TXT for 1.8.20.0 and it appears there are some items talking about changing the way the process starts up (commit r376428), but I'm not enough of a coder to understand if those would cause what I'm seeing.
>
>
> Is anyone else seeing this issue?  Should I open an issue on the tracker?  Anyone see something obvious I missed?
>
>
> --
> Thanks,
> --Warren Selby, dCAP
> http://www.SelbyTech.com
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                 http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users
>