[asterisk-users] DAHDI: How to know since when it is used? How to shutdown after max time?

[Gerardo Barajas]

On Wed, Jan 2, 2013 at 5:39 PM, bilal ghayyad <bilmar_gh at yahoo.com> wrote:

> Hi;
>
> How can I know the duration that the DAHDI channel is still used? I need
> to know its status and since when it is in this status, how?
>
> Also, is it possible to hangup the channel if it has been openned more
> than 90 minute? Other than using the timeout in the Dial command (because
> this I know it).
>
> What is happening with me that from time to time, I find some DAHDI
> channels are stayed connected (stuck) for long time. I know how to write
> the extensions.conf in a way to handle the hangup properly, also I send the
> incoming calls to the voicemail to be sure it is hanged up properly. One
> more thing, I set the rtptimeout in case there is any problem in the sip
> phone and the network .. But, still after sometime, I am surprised that
> some channels are stuck and stayed connected and then I have to reset it
> manually !! This is happening only in the analoge channels.
>
> What other than the rtptimeout, the hangup in the extensions.conf, the
> voicemail? Is there anything I have to take care for it that might cause
> this stuck and keeping the channel openned?
>
>

What kind of trunks you are using? Analog? Digital (E1, T1)?

Saludos/Regards
--
Ing. Gerardo Barajas Puente

Proyectos Especiales/Preventa | www.neocenter.com
T:+52 (55)  8590-9000 x 7003
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130103/f4dd3dcd/attachment.htm>