[asterisk-users] Asterisk calls between 2 private networks
duncan at e-simple.co.nz
Thu Feb 7 14:18:59 CST 2013
On 8/02/2013, at 6:49 AM, Frank <frank at efirehouse.com> wrote:
> I thought about that.
> I will give it a shot tonight and will post back my results in here.
> On 2/7/13 12:39 PM, Eric Wieling wrote:
>> The easiest thing to is renumber one of the networks so they are not using the same address block.
There is nothing non standard about this but if asterisk sees the end ip address as 192.168.1.X then sip.conf will show thats a locanetl so nat support wont be required which may cause you issues
With tcpdump on your asterisk box (or sip or rtp debug on on asterisk cli ) you should see where the rtp packets are going to and from when the call comes up and what sip packets are actually saying to each other
But renumbering would help especially if you did want a vpn or other networking between the sites
More information about the asterisk-users