[asterisk-users] Device states

[Tommy Cooper]

Hi,
I am using Corosync v1.4.1 to distribute device states between 2 Asterisk servers. I am getting 4 different nodes but I only have 2 running and in my /etc/corosync/corosync.conf I only defined 2 nodes which are 192.168.1.110 and 192.168.1.111. How do I remove the other 2? I also created a hint in extensions.conf to test my config and changed its state from the asterisk cli and its state did not even show up on the other Asterisk server. Thank you.

node2*CLI> corosync show members 

=============================================================
=== Cluster members =========================================
=============================================================
===
=== Node 1
=== --> Group: asterisk
=== --> Address 1: 192.168.1.110
=== Node 2
=== --> Group: asterisk
=== --> Address 1: 192.168.1.111
=== Node 3
=== --> Group: pcmk
=== --> Address 1: 192.168.1.110
=== Node 4
=== --> Group: pcmk
=== --> Address 1: 192.168.1.111
===

node2*CLI> corosync show config 

=============================================================
=== res_corosync config =====================================
=============================================================
===
=== ==> Publishing Event Type: device_state
=== ==> Subscribing to Event Type: device_state
=== ==> Publishing Event Type: ping
=== ==> Subscribing to Event Type: ping
===
=============================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130422/dc67f3dd/attachment.htm>