[asterisk-users] Asterisk 11.2.1 / dahdi destroy channel / asterisk crashes

[Thorsten Göllner]

Thanks! I do not have experience with bug reporting. Is that neccessary 
in that case? Where can I open a ticket for it (if neccessary)?

Am 11.04.2013 12:23, schrieb Yves A.:
> Hi,
>
> I can reproduce your report (11.0.1, libpri 1.4.13, dahdi 2.6.1) and 
> would say it is a bug...
> To remotely hang up a call use
> *
> **hangup request <channel>*
>
> where channel is the exact id of your channel as you would receive it via
>
> *core show channels*
>
> yves
>
> Am 11.04.2013 10:56, schrieb Thorsten Göllner:
>> Hi,
>>
>> I have the following setup:
>>
>> Ubuntu 12.04.02 LTS (64 bit)
>> Asterisk 11.2.1
>> Sangoma 4-Port-Card (A104d) with firmware 43 (german e1-ports connected)
>> WANPIPE Release: 3.5.28
>> DAHDI Version: 2.6.1 Echo Canceller: HWEC
>> libpri version: 1.4.12
>>
>> I call via sip into the dialplan. Then I do a 
>> "Dial(DAHDI/g1/voicenumber,r)". The call is bridged and everything is 
>> fine. "dahdi show channels" shows me, that channel 1 is used for the 
>> outcall. Then I try to hangup the outcall via "dahdi destroy channel 
>> 1". Asterisk crahes immediatly. No message is logged (verbose is 10 
>> and debug is 10).
>>
>> I get disconnected from the atserisk cli at this moment:
>>
>> vlr-3*CLI> dahdi destroy channel 1
>> vlr-3*CLI>
>> Disconnected from Asterisk server
>> Asterisk cleanly ending (0).
>> Executing last minute cleanups
>> voxi at vlr-3:/tmp$
>>
>> Is this a bug or is this my fault?
>>
>> Best regards
>> -Thorsten-
>>
>> -- 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130411/81db44d2/attachment.htm>