[asterisk-users] Asterisk 220.127.116.11, Requested transfer capability: 0x00 - SPEECH
paul.belanger at polybeacon.com
Wed Sep 26 09:52:17 CDT 2012
On 12-09-26 10:35 AM, motty.cruz wrote:
> I'm having issues connecting throu PRI with the following error "Requested
> transfer capability: 0x00 - SPEECH"
> Below are the logs:
> == Using SIP RTP CoS mark 5
> -- Executing [97052660 at voipphones:1] Set("SIP/4856-00000003",
> "CALLERID(num)=xxxxxxxxx") in new stack
> -- Executing [97052660 at voipphones:2] Dial("SIP/4856-00000003",
> "dahdi/g1/97052660") in new stack
> -- Requested transfer capability: 0x00 - SPEECH
> -- Called dahdi/g1/97052660
> -- Span 1: Channel 0/1 got hangup, cause 27
> -- DAHDI/i1/97052660-4 is circuit-busy
> -- Hungup 'DAHDI/i1/97052660-4'
> == Everyone is busy/congested at this time (1:0/1/0)
> -- Auto fallthrough, channel 'SIP/4856-00000003' status is 'CONGESTION'
> ; PRI to Telco
> channel => 1-23
> ; pri to PBX
> channel => 25-47
> In /etc/dahdi
> # PRI to Telco
> # PRI to PBX
> Any suggestoins are welcome!
> Thanks in advance!
You are dialing a 8 digit number. Why?
Cause No. 27 - destination out of order.
This cause indicates that the destination indicated by the user cannot
be reached because the interface to the destination is not functioning
correctly. The term "not functioning correctly" indicates that a signal
message was unable to be delivered to the remote party; e.g., a physical
layer or data link layer failure at the remote party or user equipment
Paul Belanger | PolyBeacon, Inc.
Jabber: paul.belanger at polybeacon.com | IRC: pabelanger (Freenode)
Github: https://github.com/pabelanger | Twitter:
More information about the asterisk-users