[asterisk-users] kernel: dahdi: Master changed to TE2/0/2 --- Is a normal message

[Danny Nicholas]

I would still consider the cable.  They are funny things and they make nice
meters to check them without putting your communications at risk.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of James Sharp
Sent: Thursday, September 13, 2012 2:11 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] kernel: dahdi: Master changed to TE2/0/2 ---
Is a normal message

On 9/13/2012 2:31 PM, equis software wrote:
> After exchanging the cable with other equipment was running smoothly 
> in my computer the problem persisted while the other team the cable 
> that could be bad worked.
> With this test done, now suspect the problem I have it on the Digium card.
> I perform the test specified in:
> http://kb.digium.com/articles/Troubleshooting/How-do-I-run-a-pattern-l
> oopback-test-on-a-Digium-E1-T1-card?retURL=%2F&popup=false
> With this results

Have you done loopback testing with your telco to make sure your line is
clean?  I'd point fingers there before blaming the Digium card or a cable.



--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users