[asterisk-users] Tips for installing and configuring Digum cards

Eric Wieling EWieling at nyigc.com
Wed Oct 10 14:12:39 CDT 2012


Once an option is set in the chan_dahdi.conf file it applies to every channel => line listed after the setting, until the option is changed.  This is all you really know.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of C. Savinovich
Sent: Wednesday, October 10, 2012 2:58 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Tips for installing and configuring Digum cards


>>(I'm sure its written somewhere, I just can't be bothered to look right now.) 

   If you come across it, please let me know because other than getting a hint somewhere after 2 hours of googling, I would not have known.

>>And aren't the characteristics 'cumulative' ?


   Can't tell you.  You seem to hint that they are cumulative, although as far I tested, they weren't.  



characteristic-a = foo
characteristic-b = bar
channel = 1

characteristic-b = bar
channel = 2 


channel 1 has foo and bar.  Channel 2 has bar only. ...(?)

In any case, my approach was not to take any chances and make sure all characteristics I use are cleared of any previous values in each channel declaration



Christian Savinovich
VoIP & Telephony Consultant
646-982-3572
 



	-------- Original Message --------
	Subject: Re: [asterisk-users] Tips for installing and configuring Digum
	cards
	From: Steve Edwards <asterisk.org at sedwards.com>
	Date: Wed, October 10, 2012 2:27 pm
	To: Asterisk Users Mailing List - Non-Commercial Discussion
	<asterisk-users at lists.digium.com>
	
	On Wed, 10 Oct 2012, C. Savinovich wrote:
	
	> - Not written anywhere, but the way chan_dahdi.conf is read, there are 
	> no [XXXX] separators, so any parameters in the file apply to the first 
	> "channel" statement it finds.
	
	(I'm sure its written somewhere, I just can't be bothered to look right 
	now.)
	
	Wouldn't it be more accurate to say you specify the characteristics and 
	then specify the channels the characteristics apply to?
	
	And aren't the characteristics 'cumulative' such that
	
	characteristic-a = foo
	characteristic-b = bar
	channel = 1
	
	characteristic-b = baz
	channel = 2
	
	results in channel 1 having foo and bar while channel 2 has foo and baz?
	
	-- 
	Thanks in advance,
	-------------------------------------------------------------------------
	Steve Edwards sedwards at sedwards.com Voice: +1-760-468-3867 PST
	Newline Fax: +1-760-731-3000
	
	--
	_____________________________________________________________________
	-- Bandwidth and Colocation Provided by http://www.api-digital.com --
	New to Asterisk? Join us for a live introductory webinar every Thurs:
	http://www.asterisk.org/hello
	
	asterisk-users mailing list
	To UNSUBSCRIBE or update options visit:
	http://lists.digium.com/mailman/listinfo/asterisk-users
	



More information about the asterisk-users mailing list