[asterisk-users] Sending calls from behind NAT

[Eliezer Croitoru]

Dear Bilal,

I understood correctly that the problem is that calls drops?
What router are you using?

Eliezer

On 11/13/2012 11:16 PM, bilal ghayyad wrote:
> Dears;
>
> It seems my service provider is requesting a complicated settings to allow me to send from behind NAT.
>
> What they said:
>
> "It shouldn't matter as long as you are handling the NAT correctly your end. We do not fix NAT so if you're sending internal addresses in your INVITEs or SDP then things will fail but if you're handling it correctly, we shouldn't tell the difference".
>
>
> Really, I did not understand what exactly they need. But maybe what they need is to see my public IP address without the private IP address (this what I understood if I am right).
>
> I tried to use the following in the [general] settings in the sip.conf
>
> localnet=192.168.10.2/255.255.255.254
> externadd =196.40.164.239
>
> But even, the calls are drop .. so what I have to do?
>
> The following what I get when I enabled the sip debug:
>
>
> <--- SIP read from UDP:194.0.220.220:5060 --->
> SIP/2.0 403 UA behind NAT not accepted here
> Via: SIP/2.0/UDP 192.168.10.2:5060;branch=z9hG4bK123c8781;rport=5060;received=196.40.164.239
> From: "asterisk"<sip:gwbilalkwpbx at 192.168.10.2>;tag=as45d7c63b
> To:<sip:9617565116 at outbound.exxs.com:5060>;tag=84f31a80f7bc633204d0bd8d76e9cb24.53a5
> Call-ID:6f68f414109ba1ff596726c74a0cb5ac at 192.168.10.2:5060
> CSeq: 102 INVITE
> P-Behind-NAT: source
> Server: Service Provider Global Proxy v2
> Content-Length: 0
>
> So what could resolve my problem?
>
> Regards
> Bilal


-- 
Eliezer Croitoru
https://www1.ngtech.co.il
IT consulting for Nonprofit organizations
eliezer <at> ngtech.co.il