[asterisk-users] Asterisk and the media path

[Jared Geiger]

A2billing usually stays in the media path due to the dialstring
parameters that it uses to cut a call off when the balance would reach
$0. To get Asterisk to step out of the media path, I had to change
dialcommand_param_sipiax_friend and dialcommand_param to |60|S(14400)
which lets all calls go to 14400 seconds. The default uses the L
parameter. You need to use the S parameter instead. However the S
parameter doesn't like very large numbers in Asterisk 1.4 so I've just
hard set mine.

~Jared

On Mon, May 21, 2012 at 5:18 PM, Kevin P. Fleming <kpfleming at digium.com> wrote:
> On 05/21/2012 03:45 PM, David Wessell wrote:
>>
>> More specific on sip.conf
>>
>> In sip.conf I have a trunk specified for the SIP provider, and a trunk
>> specified for the PBX itself.
>>
>> Do  I need to specify directmedia=yes on both sides?
>
>
> Yes, it has to be set on both peers involved in the bridged call.
>
>
> --
> Kevin P. Fleming
> Digium, Inc. | Director of Software Technologies
> Jabber: kfleming at digium.com | SIP: kpfleming at digium.com | Skype: kpfleming
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> Check us out at www.digium.com & www.asterisk.org
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>              http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-users